mick10
|
| posted on 15/9/14 at 12:12 PM |
|
|
End of build clearout
Hi just a few thing's to get shut off here open to offers on most will post the small stuff
silicone hose lengths
blue 23 inches long 8 mm internal bore
blue 32 inches long 8 mm internal bore
black 31 inches long 12 mm internal bore
£12.00 inc post
Hose clamps think they were stainless but not certain
£7.00 inc post
25 metres of cale sleeving 3mm diameter
£10.00 posted
cycle wings red length 30inch width 8 inches some minor damage but nothing couldn't be fixed in a few hours £5.00
same again 30 inches long brand new in white just needs a clean up £5.00
collection only
cycle wing mould been used and makes good wings just a bit dusty £20.00
collection only
Nosecone mould used to make my own nosecone successfully all return flanges with it could do with a bit of strengthening but will still produce a
nosecone no worries
24.5 inches at the widest point and 25 inches in length £50.00
collection only
good strong bonnet mould reinforced at back with wood all flanges with it they could be better strengthened but have made quite a few bonnets with
this no problem at all 37 inches at widest point and 26 inches at smallest and 37 inches long £50.00
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
robinhoodman
|
| posted on 28/9/14 at 11:39 AM |
|
|
U2U sent regarding cycle wings and mould
|
|
|
mick10
|
| posted on 28/9/14 at 05:13 PM |
|
|
Replied to U2U thanks
|
|
|
IanSouthLincs
|
| posted on 28/9/14 at 07:26 PM |
|
|
u2u sent re. cycle wings
|
|
|
