quote:

---

Originally posted by qwerty_100
Sylva Phoenix for Sale

EX Ian Gray car built by Stuart-taylor Motorsport. I brought this car some 4 years ago it had been stored for the previous 4-6 years prior to that as it had blown up the 1.6 CVH it was built with. I did a partial rebuild before taking her to the Le-Mans classic in 2016 and various other trips. I have not used her much over the last year so I have decided to sell her.

Rebulit Vauhall Redtop with coscast head mated to ford Type9 gearbox covered 2000 miles.
New rings STD
Mains STD
B/ends STD
All gaskets
Water pump
Oil pump
Westfield rear wheel drive sump
New Hydraulic lifters
Vernier cam timming wheels. (just get timming more accurate)
New stainlees steel lightend flywheel
New clutch
New exhaust made (mild steel)
Bogg Brothers inlet running R1 carbs with bike fuel pump
No Diz ECU running off the 60-2 crank sprocket.
New gaz shocks and springs all round
Intertrim seats fitted
New 4 point harness
New dash made
new clocks and toggle switches fitted
New Screen
Roll Bar and minilite wheels Powder coated in red.
Carpets replaced
new fuel tank.
All new lighs front and rear.
New wheel bearings .
Front brake calipers and discs replaced
New radiator and fan assembly
I rewired the front wiring harness and fuse box including relays as it was such a mess it was easier to start a fresh the rear was just tieded up. Body work was resprayed with 2k paint sky grey . £5750 ono . I have tried to upload picture but it has not worked so please send U2u with email address and i will send them over. I will add picture to this tommorow when I am can get some one to help me. Car is c
urrently on sorn but will come with a fresh MOT

---

quote:

---

Originally posted by alfas
thats a Phoenix (or which is commonly called a Phoenix)

the Fisher Fury did not have that waisted body...it was more straight on the sides
the sylva fury had doors and a windscreen

---

quote:

---

Originally posted by alfas
thats a Phoenix (or which is commonly called a Phoenix)

the Fisher Fury did not have that waisted body...it was more straight on the sides
the sylva fury had doors and a windscreen

---

quote:

---

Originally posted by peter030371

quote:

---

Originally posted by alfas
thats a Phoenix (or which is commonly called a Phoenix)

the Fisher Fury did not have that waisted body...it was more straight on the sides
the sylva fury had doors and a windscreen

---

But that looks like a Fury rear end....who knows what Stuart Taylor did to the moulds when they had them though

---

quote:

---

Originally posted by qwerty_100
Dear All
So to clarify again this is a STM Phoenix and when the engine was swapped I needed to more engine bay clearance so I bought a bulge from Fury sports cars not the bonnet just a bulge and this was cut into the original bonnet of the Phoenix so this is why it looks like a fury.
Jeff we have had this discussion before on the JPSC web site and the same conclusion was reached hope this clears this up many thanks.
Kev

---

quote:

---

Originally posted by qwerty_100
Dear All
So to clarify again this is a STM Phoenix and when the engine was swapped I needed to more engine bay clearance so I bought a bulge from Fury sports cars not the bonnet just a bulge and this was cut into the original bonnet of the Phoenix so this is why it looks like a fury.
Jeff we have had this discussion before on the JPSC web site and the same conclusion was reached hope this clears this up many thanks.
Kev

---