Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: ST170 Rebuild
Barksavon

posted on 8/6/19 at 12:06 PM Reply With Quote
ST170 Rebuild

Currently putting our ST170 engine back together, it's a good while since I took it apart and my recall of how a few things need to go back together seems to have diminished.
Has anyone got a photo of the timing belt tensioner in position on the block (without the covers in place) as I can't recall how it goes to enable the tension to be applied to the belt.
Also any pointers on putting the inlet camshaft pulley (vvt) back on...???
Thanks
Ian

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 8/6/19 at 08:26 PM Reply With Quote
There is a tag on the tensioner that fits in a cut out in the tin back plate



[Edited on 8/6/19 by big_wasa]

View User's Profile View All Posts By User U2U Member
Barksavon

posted on 9/6/19 at 07:24 AM Reply With Quote
Thanks for posting that , is it a page from a ST170 engine manual?

I'd better have a look for my tin back plate.....

Thanks again

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 9/6/19 at 03:22 PM Reply With Quote
Just popped up on the net when searching for torque settings.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.