Board logo

Gaz shocks bushings
Mr Hunter - 26/7/20 at 09:10 AM

I have a set of gaz shocks and they came with 12.7mm bolt holes and 32mm long bushings but i need bushings with 10mm bolt holes, i have searched everywhere and cant find anything.Do someone of you good folks know where to look for them?
They should be 10mm bolt holes and ideally the lenght of the crush tube should be 40mm,the ID of the shock eyelet is 22mm.
Thanks


Leeroy06 - 26/7/20 at 12:16 PM

Phone gaz directly and got some. They will be 10.2.mm holes. Tell them you're requirements they will sort you out. Alot cheaper than I thought too.


Mr Hunter - 26/7/20 at 12:27 PM

Thanks for the info.I have been trying to get ahold of gaz via email for a week now and my local retailer of gaz shocks has been trying for a month,sadly no reply.I guess i have to phone them directly.Unfortunatley my engilsh is not that good but i think i will manage


Mr Hunter - 28/7/20 at 11:45 AM

I called gaz and they where very helplful and nice.
They sorted me out.
Extremely good service!