Bluemoon
|
| posted on 30/3/06 at 09:31 AM |
|
|
Narrow body westfield screen will it fit?
Any one know if a Narrow body westfield screen will it fit the indy?
Dan
|
|
|
|
|
graememk
|
| posted on 30/3/06 at 09:47 AM |
|
|
theres one one ebay atm, why not him for a few measurments.
NTDWM
|
|
|
Bluemoon
|
| posted on 30/3/06 at 12:18 PM |
|
|
I've tryed.... But thanks anyhow..
[Edited on 30/3/06 by Bluemoon]
|
|
|
Phil. S
|
| posted on 30/3/06 at 12:45 PM |
|
|
I've just taken the windscreen off my narrow bodied Westfield to fit an aero screen. It's in the garage so I can have a measure up tonight
and get back to you.
"The unexamined life is not worth living" (Socrates)
"The unlived life is not worth examining" (Kopp)
|
|
|
Bluemoon
|
| posted on 30/3/06 at 01:05 PM |
|
|
Thanks phil, See attached for pic that would help a little..
 
screen size
[Edited on 30/3/06 by Bluemoon]
|
|
|
bob
|
| posted on 30/3/06 at 01:29 PM |
|
|
I've got an old westie screen on my Indy,i'll have a measure up as i do not really know what generation westfield its from.
Its not a perfect fit but hey what is on these cars 
 
Rescued attachment screen pics 001.jpg
|
|
|
Bluemoon
|
| posted on 30/3/06 at 02:08 PM |
|
|
Thanks bob, if you could measure it up that might help me.
Thanks
|
|
|
mangogrooveworkshop
|
| posted on 30/3/06 at 06:26 PM |
|
|
Any thing will fit but the ends stick up and are far from perfect. The westy has a flatter scuttle than the indy. MK do have screens in stock that are
made to fit.
cheers
|
|
|
bob
|
| posted on 30/3/06 at 07:38 PM |
|
|
On my screen X = 890mm and Y = 100mm.
Inperfections on the arc are taken away by the rubber sealing strip whiich was purchased from lolocost (robin hood) for about £5.
I wasnt sure how it was going to turn out but at £70 including ali screen supports i could hang a barn door on i'm happy
 
Rescued attachment IMG_3975.jpg
|
|
|
Bluemoon
|
| posted on 31/3/06 at 09:18 AM |
|
|
Thanks Bob,
Did you measyure to the outside of the "tips" i.e frame edge?.
Dan
|
|
|
bob
|
| posted on 31/3/06 at 10:04 AM |
|
|
quote:
Originally posted by Bluemoon
Thanks Bob,
Did you measyure to the outside of the "tips" i.e frame edge?.
Dan
Dan
Yes from the absolute corner tips of the frame,the screen was a total bad fit on the upper tier of the scuttle but works a lot better sitting in front
of the lip.
I have a small gap i need to fillet inbetween the screen supports and the scuttle but it is hardly noticable, just another job on the list 
|
|
|
Phil. S
|
| posted on 31/3/06 at 06:04 PM |
|
|
Sorry for the delay. Just been out to measure my screen. X is 89cm and Y is 7.4cm. Hope that helps. That's with the screen off the car, and no
rubbers in the way, so it's accurate.
Mine will be for sale soon (with rear view mirror) if you're interested, as will the side supports, wiper motor, wipers, washer bottle, washer
motor and a racetech wing mirror.
[Edited on 31/3/06 by Phil. S]
"The unexamined life is not worth living" (Socrates)
"The unlived life is not worth examining" (Kopp)
|
|
|
Bluemoon
|
| posted on 1/4/06 at 04:51 PM |
|
|
Hi Phill, you have u2u..
|
|
|
