Indymike
|
| posted on 1/2/07 at 08:03 AM |
|
|
MK pedals
What have people done to make their MK pedals less slippery. I've looked at some aftermarket cover sets, but they al seem to require a larger
surface to attatch to than the MK pedals have.
 
pedal covers
Any ideas?
Build manual? What build manual?
|
|
|
|
|
macnab
|
| posted on 1/2/07 at 08:13 AM |
|
|
I take it then you don't have a welder. If not get some plate and someone to weld on larger pads. You may fail the SVA if you go along with
those fitted as I think (top of the head time...) they have to be a minimum of 50mm apart according to the box I got mine in.
[Edited on 1/2/07 by macnab]
|
|
|
daviep
|
| posted on 1/2/07 at 08:22 AM |
|
|
How about non slip tape such as
THIS?, or a more
locost solution would be to mix some coarse sand into a little paint and paint pedals with it then seal it in with another couple of coats of clean
paint. We do steel container floors like this at work and it is very effective and very hard wearing.
Regards Davie
|
|
|
macnab
|
| posted on 1/2/07 at 08:23 AM |
|
|
thats a good idea.
|
|
|
viatron
|
| posted on 1/2/07 at 08:29 AM |
|
|
Skateboard tape, its only a couple of quid a pack on fleabay and does the job fine.
Mac
|
|
|
Indymike
|
| posted on 1/2/07 at 08:32 AM |
|
|
Don't have a welder I'm afraid (couldn't use one if I had, though! ).
The tape seams a good idea, see if I can get some of that over here.
Thanks guys.
Build manual? What build manual?
|
|
|
Humbug
|
| posted on 1/2/07 at 08:35 AM |
|
|
I used a Woolworth's rubber shoe sole kit - glued the rubber on with the glue provided, then trimmed to size with a Stanley knife. I did it
specificaly for SVA, but have left them on and they are still in place 2500 miles later
|
|
|
Hellfire
|
| posted on 1/2/07 at 08:37 AM |
|
|
OEM Rubber Mini Pedal Pads fit (with slight adjustment). The accelerator you want slippy!
Steve
|
|
|
cryoman1965
|
| posted on 1/2/07 at 09:01 AM |
|
|
I glued on a piece of emery cloth with araladite. Works fine. Passed sva.
Nige
|
|
|
James
|
| posted on 1/2/07 at 10:48 AM |
|
|
Skateboard grip tape!
Off-cuts free from any board shop.
Cheers,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
Hellfire
|
| posted on 1/2/07 at 12:27 PM |
|
|
Vauxhall Corsa pedal rubbers. Perfect fit without any modification. 
Phil
|
|
|
whitestu
|
| posted on 1/2/07 at 02:25 PM |
|
|
I used grip tape and passed sva no probs
Stu
|
|
|
PAUL FISHER
|
| posted on 1/2/07 at 05:26 PM |
|
|
Just take into account,there is not alot of room in the foot well on a Indy,and the pedals are very close together,add to this a set of wide pedals
like the ones pictured in your original post,and you could end up pressing the throttle pedal at the same time as the brake,with your average size 10
footwear on,so if you want to go for the sporty look go for the narrowest pedals you can find,these are also easier to fit to the narrow Indy
pedals..jpg)
|
|
|
Smartripper
|
| posted on 1/2/07 at 05:31 PM |
|
|
Hello,
Made some with a friend off mine.
It's very easy and get's too SVA oke..
Daniel
 
Rescued attachment pedaal.jpg
|
|
|
