nitram38
|
| posted on 18/2/07 at 03:43 PM |
|
|
Driveshafts made here!
When I went to the race car show at excel in Jan I picked up a leaflet for this firm. They put splines on driveshafts, cold drawn.
I will be using them to put a Rover spline one end and a lobro on the other.
Just thought it might help some of you guys out:
Track and Rally
|
|
|
|
|
MikeR
|
| posted on 18/2/07 at 06:34 PM |
|
|
have you contacted them?
I asked for a quote to make a drive shaft for my de-dion. GB Engineering wants about a 90pounds per shaft. These are the ones that lots of grassers
use and are of a known good quality.
Track and Rally wanted £176 per shaft! GB do gun drilled 'unbreakable' shafts for less!
|
|
|
nitram38
|
| posted on 18/2/07 at 06:58 PM |
|
|
No I haven't got my quote back yet !
|
|
|
nitram38
|
| posted on 19/2/07 at 09:24 PM |
|
|
You were right, £174 each plus £50 to have them drilled !!!!!!!!!!!
Have you got gb engineerings contact details handy?
Cheers Martin
|
|
|
MikeR
|
| posted on 19/2/07 at 10:17 PM |
|
|
errm......
not handy,
search on here for GB engineering or google, they are based in Nantwich. NS Dev often reconmends them (they do LOTS of grass track drive shafts).
|
|
|
Stu16v
|
| posted on 20/2/07 at 08:11 PM |
|
|
GB Engineering - 01270 841081
Dont just build it.....make it!
|
|
|
fastavatar.jpg){kind=avatar}
