Jesus-Ninja
|
| posted on 3/2/08 at 07:32 PM |
|
|
First ideas
Well, not really first, butthe first I've drafted. Chassis design is almost there now, so I've been
doodling....jpg)
Suspension geometry tool here >>> http://www.locostbuilders.co.uk/viewthread.php?tid=81376
|
|
|
|
|
Jesus-Ninja
|
| posted on 3/2/08 at 07:33 PM |
|
|
another.jpg)
Suspension geometry tool here >>> http://www.locostbuilders.co.uk/viewthread.php?tid=81376
|
|
|
Jesus-Ninja
|
| posted on 3/2/08 at 07:34 PM |
|
|
another angle.jpg)
Suspension geometry tool here >>> http://www.locostbuilders.co.uk/viewthread.php?tid=81376
|
|
|
Jesus-Ninja
|
| posted on 3/2/08 at 07:34 PM |
|
|
above....jpg)
Suspension geometry tool here >>> http://www.locostbuilders.co.uk/viewthread.php?tid=81376
|
|
|
Mr Whippy
|
| posted on 3/2/08 at 07:44 PM |
|
|
it's a bit foggy, hard to make out the frame
Fame is when your old car is plastered all over the internet
|
|
|
Jesus-Ninja
|
| posted on 3/2/08 at 07:57 PM |
|
|
quote:
Originally posted by Mr Whippy
it's a bit foggy, hard to make out the frame
That's the point 
the sketches are about the bodywork, not the chassis.
[Edited on 3/2/08 by Jesus-Ninja]
Suspension geometry tool here >>> http://www.locostbuilders.co.uk/viewthread.php?tid=81376
|
|
|
Rogue Se7ens
|
| posted on 4/2/08 at 02:23 AM |
|
|
Its a good idea to work on the design over the chassis drawing. It looks like you are making some good progress, I like the fast back idea better
that the coupe.
|
|
|
Jesus-Ninja
|
| posted on 4/2/08 at 10:31 AM |
|
|
quote:
Originally posted by Rogue Se7ens
Its a good idea to work on the design over the chassis drawing. It looks like you are making some good progress, I like the fast back idea better
that the coupe.
Thanks!
Yes, I like the fast back too. Both aestheitcally and practically too - access to the fuel tank and rear shocks will be better. Easier tomake
aswell!
I thought the rear arches were a bit low - I tried to match the fronts, but it didn't seem to follow the lines of the car, so I did
this....jpg)
Suspension geometry tool here >>> http://www.locostbuilders.co.uk/viewthread.php?tid=81376
|
|
|
Jesus-Ninja
|
| posted on 4/2/08 at 06:18 PM |
|
|
Some 3d images:
http://uk.youtube.com/watch?v=XrOYpjYGGMc
http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=51996&d=1202147683
http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=51997&d=1202147690
[Edited on 4/2/08 by Jesus-Ninja]
Suspension geometry tool here >>> http://www.locostbuilders.co.uk/viewthread.php?tid=81376
|
|
|
