paulmw
|
| posted on 4/2/08 at 09:47 PM |
|
|
Bike clocks Mileage
Malc from Yorkshire engines said that there was a company on ebay that can reset the mileage to zero on Kawasaki bike clocks. Nothing dodgy as my
engine is new but the clocks are from an '06
Ive tried a search but cant find any company which does this
Any help
Paul
|
|
|
|
|
Hellfire
|
| posted on 4/2/08 at 09:56 PM |
|
|
Try doing a search on 'Mileage correction'
Phil
|
|
|
paulmw
|
| posted on 4/2/08 at 10:06 PM |
|
|
Cheers, found them. They look a bit del boy though
The clocks only have 700 miles on so is it worth it or do they need to show small numbers considering I am going for a new reg plate
|
|
|
BenB
|
| posted on 4/2/08 at 10:10 PM |
|
|
Just say it was a long way to SVA 
I don't think the number of miles on the odometer has anything to do with whether you get a new reg or not....
|
|
|
adithorp
|
| posted on 4/2/08 at 10:35 PM |
|
|
I have a mobile guy who comes into work to recode radios. Think he also does digital dash adjustment. I'm hopeing he can reset my R1 clocks.
I'll u2u his number tommorow.
adrian
|
|
|
Taylor R1
|
| posted on 4/2/08 at 10:47 PM |
|
|
Try
http://www.scorpio-electronics.co.uk/
|
|
|
jimgiblett
|
| posted on 4/2/08 at 11:42 PM |
|
|
quote:
Originally posted by Taylor R1
Try
http://www.scorpio-electronics.co.uk/
Yep. That's who I used too.
- Jim
|
|
|
adithorp
|
| posted on 21/2/08 at 12:05 AM |
|
|
I had my dash milage adjusted this week by KennyDecode 07966 421213. He's Tameside based but mobile service.
I'd called him in for a lost radio code and asked him about the dash while he was in. It took a couple of attempts but it now reads 15miles as
opposed to the previous 2250.
adrian
|
|
|
paulmw
|
| posted on 21/2/08 at 05:02 PM |
|
|
How much does he charge?
|
|
|
adithorp
|
| posted on 23/2/08 at 12:03 AM |
|
|
Not Locost! £40!!!
adrian
|
|
|
Johneturbo
|
| posted on 12/1/09 at 04:58 PM |
|
|
Just done a search on this,as my clocks from Malc read 19,000! i've been getting quotes of £80!! does kenny do a postal service!!!?
|
|
|
adithorp
|
| posted on 12/1/09 at 09:28 PM |
|
|
Don't know but I doubt it. He had a crib sheet with the procedures for various clocks. He did his stuff then plugged the clocks back into the
loom to check the result. It took a couple of goes to get it right. Without being able to connect it back up...
Give him a ring and ask. I told him I'd passed his number on via here.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
Johneturbo
|
| posted on 12/1/09 at 09:36 PM |
|
|
I spoke with Kenny.
He seems ok for me to send them.
he wanted what the miles are reading now, so maybe he can calculate it that way.
|
|
|
Johneturbo
|
| posted on 24/1/09 at 07:24 PM |
|
|
Just thought i'd update, i got my clocks back from Kenny they now read 15miles
|
|
|
