Hi everybody,
I'm currently installing my handbrake cable (haynes roadster) I need to shorten the cable, im going to do it at the handbrake end. My question is
does anybody know where i can get a cable joiner to rejoin the cable after I've shortened it ? I have used google etc but have had no luck.
Many thanks Dan
I used the inside of a lerge treminal block clamped it up witht he screws then soldered it to the cable
You could use something like this:
http://www.chainreactioncycles.com/Models.aspx?PartnerID=79&ModelID=50883
on them both, and make a small bracket for the two cables to slot into?
Speak to an AA patrol. They have temporary clutch cable repair kits which have loads of bits and pieces you can use.
any good ?
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0192985
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=4915388
I used some of these (type cable clamp into Ebay). I've got some spares that you can have. Just send me a U2U and I'll stick some in an
envelope. I'd suggest 2 per join.
PK10 CABLE CLAMP 3MM on eBay (end time 04-Dec-10 10:15:46 GMT)
Cheers
Alex
I used wire cable clamps from B+Q. Cheap and effective though I've heard rumours that some SVA/IVA people don't like them...
A slightly obvious question here .... Why not just resolder the nipple on the handbrake end of the cable?
quote:
Originally posted by RazMan
A slightly obvious question here .... Why not just resolder the nipple on the handbrake end of the cable?
Could you post some pictures?
I'm changing my rear brakes from drum to disc but i'm not sure how the handbrake actuates...
All you need to rejoin the cable is to drill out a piece of brass bar to the diameter of the cable insert both pieces of cable in and silver solder. It helps to put a counter sink into the the holes for a nice fillet to form. Job done!
First picture shows the hook on the rear disc setup. Second picture shows how I connected the cable back together after shortening it. Don't know
if the pictures will come out cos I havnt got an effing clue !
Cheers Dan
[Edited on 27/11/10 by wylliezx9r]
So what it does is to press the pads on the disc, right?
That won't put pressure on the front pads also?