Board logo

Tillett seats, Pi dash, Racetech gauges
frodo_monkey - 29/3/24 at 06:16 PM

Hi there,

I’ve upgraded my Ginetta to Jenveys, an Omex ECU and a Dash2 Pro… so the stuff on there before is up for grabs! Was all fitted to the car and working until the end of 2023.

- 2x Weber 45 DCOEs (type 152) on a Zetec inlet manifold, freshly serviced and with a throttle linkage. SOLD

- MBE 967 serial port ignition-only ECU with loom and connectors for Zetec coil pack/crank sensor and throttle position sensor. Was mapped for a 190bhp 2.0 silvertop by Northampton Motorsport, will throw in a MBE serial cable with USB adaptor. Software is available free online. SOLD

- Pi Omega D2 Pro dash with shift light module. Comes with loom, an IR beacon, a GPS puck, an oil pressure sender and 2x thermocouples for oil/water temperature. Manuals all available online. £400

- 52mm Racetech mechanical gauges, one oil pressure and one water temperature. £30 each

- 2x Tillett low-back W1i seats. Base-mounted, one with a runner. Used fair condition. Bought them secondhand from someone with a Fury but can confirm they won’t fit a Ginetta G20! £450 the pair

Collection from South Wales between Chepstow and Monmouth, postcode NP16 6NA (or I work in Bristol and could bring them with me). May be able to post by arrangement.

Cheers,

Si

[Edited on 30/3/24 by frodo_monkey]

frodo_monkey - 30/3/24 at 02:08 PM

Carbs and ECU sold

gsr88 - 8/4/24 at 10:30 PM

Hi
Can you share some pics of the gauges please?
Thanks

frodo_monkey - 9/4/24 at 10:26 AM

quote:
Originally posted by gsr88
Hi
Can you share some pics of the gauges please?
Thanks


Will take some tonight.

gsr88 - 26/4/24 at 08:52 AM

any luck with the gauges?

frodo_monkey - 27/4/24 at 02:33 PM

Sorry yes, I did take the pics then appear to have forgotten…


[img]https://flic.kr/p/2pMGTki[/img]


[img]https://flic.kr/p/2pMKe1L[/img]

They’re both 1/8”NPT, the water temp gauge is 4ft and the oil pressure gauge 3ft.