Board logo

brake hose 1/4"inner dia (6mm-ish)
skidude88 - 6/4/09 at 01:09 PM

After approx 200mm length of 6mm brake hose.

Tried most local motor factors - no joy (

blakep82 - 6/4/09 at 01:11 PM

6mm id brake hose? its normall only about 3mm

Paul TigerB6 - 6/4/09 at 01:14 PM

quote:
Originally posted by blakep82
6mm id brake hose? its normall only about 3mm


It may be for the low pressure side - between remote reservoirs and master cylinder. This is often 7mm ID

This sort of stuff

[Edited on 6/4/09 by Paul TigerB6]

Mr Whippy - 6/4/09 at 01:17 PM

item 4, comes in 1m lengths linky

or that one ^^ oh were just too fast on this forum

[Edited on 6/4/09 by Mr Whippy]

Paul TigerB6 - 6/4/09 at 01:21 PM

quote:
Originally posted by Mr Whippy


or that one ^^ oh were just too fast on this forum

[Edited on 6/4/09 by Mr Whippy]


Sorry Mr W - you were missing for too long so must have really slowed down in that time!!!

skidude88 - 6/4/09 at 01:31 PM

yeah for Remote to Master,

Master connector is 6mm

blakep82 - 6/4/09 at 02:22 PM

sorry, yeah
I'm using wilwood ones with the res built in, i forget about these seperate ones

britishtrident - 6/4/09 at 04:06 PM

Rover 620 clutch system --- has a hose that should suit.