Something new to keep my brain active over winter. I am looking at getting the standard ecu on an st170 to run the engine stand alone ie in a kitcar.

Ive made a start and bought some bits on ebay but I am also looking for any free bits I can lay my hands on. I of would be happy to cover postage ect. I am looking for any bits that most wont use.


I give plenty of little bits away so thought I would ask.

Sort of bits I want..

Fuel rail with pressure sensor
inlet mani / plenum. (I know no body is going to give away the bit people stick carbs on)
fuel pump
air shut of valve
fuel pump driver modual (I am after a plug and wire)
any sensors or wiring specific to the st170.
any unwanted ecu's with at least 1 key/chip
obd2 port

If I get some donations of bits and I crack it I may even do an "how to"

The aim is 170bhp with out the £600 ecu and £xxx of mapping.

cheers

Bike carbs and Megajolt will see you over 170bhp...

Im not sure if you will get much of that for free, I sold a air shut off valve for £100 on eBay not long ago. But good look

Ok that item in good order has value but other bits do not. Wouldn say no to a duff one.

quote:

---

Originally posted by degmwilliams
Im not sure if you will get much of that for free, I sold a air shut off valve for £100 on eBay not long ago. But good look

---