i have a fuel injected 4age with a emerald ecu and i need a dash so i was just wondering if bike clocks such as yamaha R1 can be used and if so i will need some help with a wiring drawing etc
cheers

i have some busa clocks if interested. will cut you a deal if you need them.

Even if it will work, most bikes have analogue style rev counters. Will look a bit silly having a red line of 17k rpm and actually only revving to about 8.5-9k

[Edited on 6/11/12 by pmc_3]

busas dont rev as high as the litre screamers

Might cost you a little bit more, but far more functionality & will fit without issue

[img]
Ace 6XXX [/img]


[img]
Acewell 6556 [/img]

I'd be surprised if youcould "drive" a bike speedo with any accuracy from anything other than the original engine/box & transducer - you know the answer - fit an Acewell!

They do 0 - 9000 & 0 - 15000 tachos as well.