I'm thinking of breaking my stylus and wondered what I can reasonably expect to get for the rolling chassis/body, it's fully registered in my name non Q plate and goes through a MOT on visual smoke for emissions. The body is ok with a couple of bits of starring , the left hand cill has been cut open for a side mount exhaust, floor mount pedal box, pro comp dampers and springs etc

Cheers

Shooter

Forgot to say it's got a full good fitting soft top as well

[Edited on 24/1/21 by Shooter63]

Any pictures, description of what parts would be included?

Let's say, just the rolling chassis, so no engine, no gearbox, no diff ( but diff housing) , all suspension in place, all wheels ( 14" minilite type ) 888 tyres, side silencer 2.5" bore, all brake lines and hand brake , obviously all wiring as the car has been on the road years and a full dash of instruments. So in other words, stick an engine /box/ diff in it and off you go

Shooter

Here’s the thing, likes of me is looking for new project and would be keen on this but can do nothing about viewing/collecting etc whilst I’m locked down with no nonessential travel etc. You may be best holding for a while or be prepared to have likes of me say I can’t view it and will need a 3rd party to collect and deliver so that needs reflected in the price.

Any chance of pictures?

quote:

---

Originally posted by rdodger
Any chance of pictures?

---

With V5c, but no engine, it's got to be worth £3K+.

A chassis with Reg only (correct reg that is) seem to go for £1.5K as this would be the rough cost of an IVA.

In the simler position where I want to keep my engine for my next project.

I would want £4K for a solid properly registered roller with a few nice bits. But I am collecting parts for a simpler install as the price of these little cars is on the up. Ready for summer with an mot £6.5k+

It's registered in my name v5c states 2005 sylva stylus V reg