Board logo

diy Electrostatic Powder Coating System
oadamo - 17/4/07 at 11:41 PM

has anyone got one of these off ebay.
just want to see if there anygood.or how bad.
adam

http://cgi.ebay.co.uk/Electrostatic-Powder-Coating-System-240-VOLT-UK_W0QQitemZ190100356262QQihZ009QQcategoryZ30923QQrdZ1QQssPageNameZWD1VQQcmdZViewIt em


rjbrookes - 18/4/07 at 12:41 AM

Link dont seem to work bud?????????!?!?!?!?!!


UncleFista - 18/4/07 at 12:56 AM

CLICK


rjbrookes - 18/4/07 at 01:22 AM

got it now!


MG David - 18/4/07 at 07:24 AM

You are limited to powder coating items you can get in a domestic electric oven, unless you have access to a bigger oven.

A website with details of someone using that type of system is:-
www.mckennasgarage.com/xke/index.htm

Some information about supplies can be found at:-
www.caswelleurope.co.uk/


Bluemoon - 18/4/07 at 08:09 AM

Looks fun, but your going to need an oven in the workshop:

"not use the oven for cooking food in afterwards! as the curing vapours are mildly toxic"

Dan


StevieB - 18/4/07 at 08:17 AM

Not a bad pprospect if you have an old electric oven and a bit of space in the garage for one (I'm replacing my oven soon, and my garage workbench is already the kitchen units from my last house that never got installed).