I am fitting an XE into my Luego - having a bit of difficulty judging how much clearance I need for the clutch arm - has anyone got some photos showing the clutch arm's position as it emerges from the bellhousing? - I don't think it even has to be an xe / type 9 combo to give me the insight I need.

Thanks in advance, Steve.

Mine sticks out the side to about the same diameter as the main bit that bolts to the engine... if you get my drift

not really? - your cluch arm sticks out about the same diameter as the main bit that bolts to the engine?

?

Yep, thats it.

Anyone got a photo of their bellhousing ?

That made me laugh.

Don't ask why....

you lot get worse!

All I wanted was a simple photo.....

quote:

---

Originally posted by zilspeed
Anyone got a photo of their bellhousing ?

That made me laugh.

Don't ask why....

---

sorry, don't have a pic but can tell you that the arm on my mt75 is only about 6mm from the chassis when it'sw fully released, the rubber cover almost touches!

hth.
john