Board logo

Ford x flow spark plugs
Nickctp - 2/9/12 at 08:24 PM

Hi all

Which spark plugs would be best recommended for a 1600 x flow??

Cheers

Nick

Dick Axtell - 2/9/12 at 09:44 PM

NGK. Will check full designation tomorrow, and edit this post.

gdische - 3/9/12 at 07:50 AM

I'm using NGK BPR6ES

Geoff

steve m - 3/9/12 at 10:20 AM

Me too, 1600 xflow

cliftyhanger - 3/9/12 at 11:00 AM

Are you using megasquirt or equivelent?
For old skool distributer I reckon BP6ES (ie no resistor)

Nickctp - 3/9/12 at 11:47 AM

quote:
Originally posted by cliftyhanger
Are you using megasquirt or equivelent?
For old skool distributer I reckon BP6ES (ie no resistor)


Old skool dizzy - electronic ignition (no points) - looks like the 6ES it is then.

Ta

steve m - 3/9/12 at 01:02 PM

Bestek dizzy on mine

Alfa145 - 3/9/12 at 01:25 PM

I have the 7ES ones in mine not the 6. On the rolling road he advised I went up to this as I was running a tuned engine compared to the standard. And so far one set has lasted ages and still look clean. Where as when I was running the 6's I had to change them alot

(BCF2 cam, bored +90 and Aldon ignitor ignition)