liftarn
|
| posted on 22/7/02 at 04:03 PM |
|
|
Boot
One part that the book never mentions is how to construct the boot (trunk). Any ideas on how to make a boot and lockable lid?
|
|
|
|
|
Jon Ison
|
| posted on 22/7/02 at 04:50 PM |
|
|
enter PTM............ ? 
|
|
|
locodude
|
| posted on 22/7/02 at 05:27 PM |
|
|
Jon
Busy enough at moment thanks!
Chris PTM
|
|
|
Jon Ison
|
| posted on 22/7/02 at 05:32 PM |
|
|
K.... i won't nag you about n air box, got a contractor in at work at mo who is ace alloy/fabricator/tig welder, making me a F3 style box with cone
filter out in cool air, oh, and a 1/8th BSP hole for laughfin gass....... 
|
|
|
jmbillings
|
| posted on 11/8/02 at 05:17 PM |
|
|
Made an aluminium "tray" that fitted in the back nice and snug, and this was bolted in place.
Then used some of Chris PTM style plastic that Steve found lying around where he works *cough* and made the top out of 4 panels- 2 each side of the
rollbar stays, and one across the front-middle, and this attached to the back-middle piece which is hinged. Simple keylock to keep it shut.
|
|
|
chrisg
|
| posted on 11/8/02 at 07:14 PM |
|
|
You can see how I did it at:-
http://www.gibbs111.fsnet.co.uk
on build tips>trim
Cheers
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
