corrado vr6
|
posted on 1/6/09 at 09:10 PM |
|
|
Fan switch for my R1
Im looking for a fan switch for my 06 R1, im using a polo rad, i see CBS do them but im
not sure what temp range to go for, Any help much appriciated
http://r1indy7.wordpress.com/
|
|
|
001Ben
|
posted on 1/6/09 at 09:20 PM |
|
|
I have an 01 R1 engine and the fan kicks in at 103 degrees ( standard R1 temp), I have not had a problem with it and it only goes above 90 in
traffic. I will be putting a manual switch in to overide it at some point.
|
|
Kosmo
|
posted on 1/6/09 at 09:25 PM |
|
|
If your using the bike loom you only need manual overide switch, as mentioned above the fan automaticaly kicks in just above 100 degrees.
|
|
corrado vr6
|
posted on 1/6/09 at 10:11 PM |
|
|
Thanks for replys, I am using the bike loom so i will buy a nice savage fan override switch
http://r1indy7.wordpress.com/
|
|