LBMEFM
|
posted on 21/6/09 at 05:13 AM |
|
|
Fireblade rectifier
Has anyone got a rectifier for a 1995 893cc Fireblade RR-S engine for sale please. Barry
|
|
|
Ben_Copeland
|
posted on 21/6/09 at 06:54 AM |
|
|
Doh... you not killed one have ya >??
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
rgrs
|
posted on 21/6/09 at 08:41 AM |
|
|
Barry,
Instead of fitting the fireblade unit which is close to its limits at the best of times. See if you can find a superdream rectifier. slightly bigger
unit but much better heatsink.
Roger
|
|
mark chandler
|
posted on 21/6/09 at 08:46 AM |
|
|
Most 12v 3phase rectifiers will suit, just ebay a few for less than £5.
Just look for big cooling fins, I got a Ducati one for my 893 bec and a Honda Firestorm for my 893 blade after both fried regulators.
|
|
rf900rush
|
posted on 21/6/09 at 09:13 AM |
|
|
I replaced my CBR400RR (same as some erlay blade parts) with a spare Gsxr600 one.
Only thing was the Coils were on thier way out, and I did not find out 'till a mount later.
So I would check you Stator coil outputs as well.
Martin
|
|
bob
|
posted on 21/6/09 at 09:18 AM |
|
|
If your stuck give dennis Heath a call at THE GRAVEYARD
Motor cycle breakers
29-30 Fourth cross road
Twickenham
Middlesex
TW2 5EL
0208 894 5089
|
|
f1ngers
|
posted on 21/6/09 at 12:07 PM |
|
|
Dennis Heath still going!
I lived in Ashford many years ago and went as a child with my dad to Dennis Heath for parts etc. I don't suppose Dennis snr is still around as
he was getting on a bit then about 30 odd years ago![](/images//smilies/shocked.gif)
|
|
Peteff
|
posted on 21/6/09 at 12:46 PM |
|
|
We put one from a CB450 on my mate's bike and it works fine.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
bob
|
posted on 21/6/09 at 06:10 PM |
|
|
quote: Originally posted by f1ngers
Dennis Heath still going!
I lived in Ashford many years ago and went as a child with my dad to Dennis Heath for parts etc. I don't suppose Dennis snr is still around as
he was getting on a bit then about 30 odd years ago
Hi nick small world as i am in ashford now, yes they are still going but not sure if the old fella is still around.
I was at the kempton park bike jumble in may and picked a card up, i presume its now son of dennis.
|
|