macca1
|
| posted on 16/10/09 at 07:27 PM |
|
|
6 Rib pulley
I need a smallish pulley for a 6 rib poly v belt must have a bearing fitted as its being used as a replacement for an ac pump I've removed.
Anything up to around 100mm will be fine.
Ta
|
|
|
|
|
locoboy
|
| posted on 16/10/09 at 08:34 PM |
|
|
U2U Flak monkey if your struggling, he will appreciate the chance to quote you for a one off item.
Good quality work and turnaround was better than most kit car suppliers that would make you a one off, price was attractive too.
No connection just a satisfied customer 
ATB
Locoboy
|
|
|
big_wasa
|
| posted on 16/10/09 at 09:04 PM |
|
|
As above ^^
Most idlers I can think of are flat as they run of the back of the belt.
|
|
|
matt_claydon
|
| posted on 17/10/09 at 10:35 AM |
|
|
Shorter belt?
|
|
|
macca1
|
| posted on 17/10/09 at 12:37 PM |
|
|
I will need a shorter belt anyway but I must fit the pulley to keep the rotation correct for the pas/water pump etc.
I think some later fords may have something close, looking at some ebay ads I think the focus has a ribbed tensioner but I'm just not sure if
they are 4 or 6 also the Range Rover p38 looks promising.
As for the idea of getting one made, it is an option but I really wanted to check out the cheaper options first as I really want to keep the car
cheap
Ta Col
|
|
|
macca1
|
| posted on 19/10/09 at 05:45 PM |
|
|
All sorted, got one off an Audi tensioner.
|
|
|
coozer
|
| posted on 19/10/09 at 05:47 PM |
|
|
Most Fords have them, there was two on my ST170 engine...
1972 V8 Jago
1980 Z750
|
|
|
