Tommy P
|
| posted on 30/7/10 at 03:53 PM |
|
|
Front splitter for a Fury
Can you get a front splitter for a Fury
If so, do they work, where d'you get them from and how much.
Was thinking of making one.
|
|
|
|
|
sucksqueezebangblow
|
| posted on 30/7/10 at 04:30 PM |
|
|
I bought the bits to make mine from Carbon Mods;
Linky
Better to Burnout than to Fade Away JET METAL ~ AndySparrow © 
|
|
|
Hammerhead
|
| posted on 30/7/10 at 05:30 PM |
|
|
Lotus use marine plywood on their 2-11 track car, google it to see examples
|
|
|
snapper
|
| posted on 30/7/10 at 05:55 PM |
|
|
Seen one cut out of a sheet of ally for a Lola
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
adithorp
|
| posted on 30/7/10 at 07:09 PM |
|
|
BHG do a GRP one for the classic bonnet. It's more a front spoiler/air-dam than a splitter though. Not sure if it also fits the LeManns
bonnet.
I made some corner splitters for mine from ally. They're a bit rough and I had them for 12 months before fitting them. I feel they made a big
difference. Much more planted at the front and it took a while to get used to the reduction in high speed understeer. More stable at high speed as
before it got a bit "floatey" around and above 200kph 
Not very clear but this is the best picture I can find...
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
