paul the 6th
|
posted on 30/8/10 at 12:50 PM |
|
|
FS: EVERYTHING - cvh engine, type 9 box, differential, V5C, megajolt, 3ge wishones, calipers, gasket sets, SRAD carbs & MUCH MUCH MORE - SELLING UP
After a lot of deliberation & reflection, I've reached the difficult decision of selling up. On the plus side it means you lot are gonna be
able to pick up a lot of essential components in one fell swoop..
All the sierra bits were taken from a K reg sierra sapphire with 86,000 miles on the clock. I drove the car home from west yorkshire to north
yorkshire without any trouble.
I was going to put prices on all of this stuff but U2U me your offer & if it's about what I'm looking for then we'll sort
something out. Small items will be posted via royal mail, larger via courier and the biggest heaviest stuff will need to be collection in person. Some
of this stuff is advertised elsewhere so please don't be annoyed if it transpires that an item is no longer available once you've messaged
me..
I'll be away from my computer for the rest of the day but will be on tomorrow morning so please be patient if you don't hear back from me
today.
Rough as a ducks arse chassis - might make a nice climbing frame for the kids or a basis to start your build from? worth posting it just in case
someone is interested but otherwise it's gonna be chopped up and scrapped...
1.8 CVH engine
Reconditioned valves (thanks to WrigglyPig aka Kev for doing these for me - I owe him some beer tokens once everything sells )
camshaft
V5 document with I.D. plates cut from the car (chassis & the 2 from under the bonnet) - Have got a picture of this but it shows my home address
& the document reference number.
Type 9 gearbox
1.8 zetec silvertop - have a MASSIVE box of ancillaries & in/out manifolds for this
Re-con'd drumbrake backplates - with new cylinders
Drums
CVH stretch bolts from burton power:
Cam belt from burton power
Part of the top end gasket set (valve stem seals etc)
CVH thermostat
Sparkplugs to fit CVH
Oil filter
head gasket set
bottom end gasket set
Rollbar to haynes roadster spec (this was part of a group buy on the roadster forums a while ago)
Sierra steering colum - includes 3 keys, ignition, switchgear
Mk1 escort steering rack (mexico iirc?)
Roadster spec wishbones by 3GE (front and rear upper & lower)
threaded ends of wishbones
GSXR SRAD Carbs (600 or 750, will confirm)
SRAD carbs - TPS has a slight crack on the housing:
Zetec inlet manifold plate:
Haynes roadster differential mounts
Ford sierra differential (3.92?)
CVH inlet manifold plate
Sierra Propshaft
sierra driveshafts
Original driveshafts with drumbrakes still on the hubs
Roadster chassis plates
OMP racing steering wheel (non IVA friendly by the looks of it)
EBC greenstuff pads to fit sierra calipers
Roadster suspension brackets
Original discs and pads with loads of life left in them
Sierra dashboard (bad pic I know)
Sierra starter motor
Sierra front uprights
bits
Megajolt lite Jr. with all necessary bits
Zetec Silvertop in and out manifolds:
Build table on casters
thanks for looking
GoDesign.me.uk - Self Adhesive Vinyl Artwork, Wide Format Printed Artwork and Customised Heat
Pressed Clothing...
--------
http://picasaweb.google.com/haynesroadster - Roadster Photo Build Log
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
Strontium Dog
|
posted on 30/8/10 at 01:03 PM |
|
|
You have PM!
|
|
RichardK
|
posted on 30/8/10 at 01:22 PM |
|
|
You have u2u re starter motor & green pads
Cheers
Rich
[Edited on 30/8/10 by RichardK]
Gallery updated 11/01/2011
|
|
Strontium Dog
|
posted on 30/8/10 at 01:42 PM |
|
|
Oh! and don't scrap the chassis if it's not bent. Even if the welds aren't all that it's no big deal to grind them and re
weld. There's a lot of work in cutting all that steel not to mention the stuff doubling in price every few minutes!
It could be a good place to start for someone on a "locost" budget.
|
|
fha772
|
posted on 30/8/10 at 02:49 PM |
|
|
U2U sent, for the rollbar
http://www.ppcmag.co.uk/forum/viewtopic.php?f=47&t=6743&start=105
|
|
neilp1
|
posted on 30/8/10 at 05:00 PM |
|
|
u2u for steering column
|
|
Fishface
|
posted on 30/8/10 at 05:56 PM |
|
|
u2u sent re megajolt
|
|
paul the 6th
|
posted on 31/8/10 at 03:21 PM |
|
|
megajolt & steering column/wheel/switchgear/ignition keys now gone!
GoDesign.me.uk - Self Adhesive Vinyl Artwork, Wide Format Printed Artwork and Customised Heat
Pressed Clothing...
--------
http://picasaweb.google.com/haynesroadster - Roadster Photo Build Log
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
paul the 6th
|
posted on 1/9/10 at 06:11 PM |
|
|
OMP steering wheel SOLD
Chassis and build table potentially sold (subject to collection this weekend)
EBC green pads and starter motor SOLD
Roll Bar potentially SOLD (awaiting payment)
GoDesign.me.uk - Self Adhesive Vinyl Artwork, Wide Format Printed Artwork and Customised Heat
Pressed Clothing...
--------
http://picasaweb.google.com/haynesroadster - Roadster Photo Build Log
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
paul the 6th
|
posted on 1/9/10 at 06:12 PM |
|
|
Zetec, Gearbox, Diff, Driveshafts, New Drums & Slaves, Propshaft provisionally SOLD
Wishbones are now down to £300 for the lot (plus p&p)
GoDesign.me.uk - Self Adhesive Vinyl Artwork, Wide Format Printed Artwork and Customised Heat
Pressed Clothing...
--------
http://picasaweb.google.com/haynesroadster - Roadster Photo Build Log
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Headshot
|
posted on 1/9/10 at 06:54 PM |
|
|
How much for chassis and cvh?
Cheers (pm me if you prefer)
|
|
marcjagman
|
posted on 2/9/10 at 09:36 AM |
|
|
Chassis and build table gone, I'm collecting this weekend
|
|
mikeb
|
posted on 2/9/10 at 10:41 AM |
|
|
wishbones and brackets for chassis pm sent.
Mike
|
|
paul the 6th
|
posted on 2/9/10 at 12:39 PM |
|
|
It has just been brough to my attention that:
I AM A MORON
I've listed the wishbones at £300 ish but 3GE sell the same set brand new for £277 - I looked at the wrong product but with picture of wishbones
on their website and saw £380 as the price for the set...
Offers for wishbones on a postcard please
GoDesign.me.uk - Self Adhesive Vinyl Artwork, Wide Format Printed Artwork and Customised Heat
Pressed Clothing...
--------
http://picasaweb.google.com/haynesroadster - Roadster Photo Build Log
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
smithwrecker
|
posted on 2/9/10 at 04:04 PM |
|
|
PM sent re: wishbones and carbs
|
|