ChrisLeary
|
| posted on 30/6/17 at 07:14 AM |
|
|
Bonnet Latches
Morning all,
Before I commit to these as an upgrade to the rubber IVA catches, does anyone have any experience or opinions about their suitability to secure my
bonnet?
Bonnet Latch
They seem like a fair price for a tidy latch with the ability to secure them already built in.
Cheers,
Chris
Don't force it! Get a bigger hammer...
|
|
|
|
|
pekwah1
|
| posted on 30/6/17 at 08:08 AM |
|
|
out of interest, is there a problem with your rubber catches, or are you simply just looking for some extra security?
|
|
|
ChrisLeary
|
| posted on 30/6/17 at 08:11 AM |
|
|
Nothing wrong with them, I just don't like them aesthetically.
ATB,
Chris
Don't force it! Get a bigger hammer...
|
|
|
Bluemoon
|
| posted on 30/6/17 at 08:48 AM |
|
|
I wonder if you can get an R pin in the security hole? The over center catches (particularly the rubber ones) have a habit of unlatching..
Dan
|
|
|
ChrisLeary
|
| posted on 30/6/17 at 08:53 AM |
|
|
That's what I like about those ones, Dan... I've been onto the Protex site and you can buy the locking pins separately. Only thing is,
direct from Protex the latches are more expensive than from Merlin!!!
quote:
Originally posted by Bluemoon
I wonder if you can get an R pin in the security hole? The over center catches (particularly the rubber ones) have a habit of unlatching..
Dan
Don't force it! Get a bigger hammer...
|
|
|
907
|
| posted on 30/6/17 at 12:09 PM |
|
|
I'm with Bluemoon.
They don't tolerate misalignment of the surfaces.
Paul G
|
|
|
40inches
|
| posted on 30/6/17 at 01:49 PM |
|
|
I think, as far as looks are concerned, that they are a downgrade
The metal ones look agricultural, OK for a tool box lid. IMO
|
|
|
hkp57
|
| posted on 1/7/17 at 08:36 AM |
|
|
I went the same way, Changed only the front 2 for the ones from car builder, added the R-Clip and then i put a little length of piano wire from the
R-Clip to the inboard end of the wishbone.
Purely to prevent the bonnet coming off on the track and the wire to save losing clips.
https://www.carbuildersolutions.com/uk/latching-stainless-steel-over-centre-fasteners
https://www.carbuildersolutions.com/uk/stainless-steel-retaining-clip
Fleet
SKC Raptor R - Hayabusa
Toyota C-HR Hybrid Limited Edition
Honda VFR1200 CrossTourer
DCT
Marlin Roadster 1800
Mercedes Vito 116 Sport
|
|
|
dave107
|
| posted on 1/7/17 at 10:01 PM |
|
|
I replaced my IVA ones for some protex ones that lock when they are closed, to open them you have to slide a small catch , really pleased with them my
rubber ones sometimes opened on a journey.
|
|
|
striker-4age
|
| posted on 3/7/17 at 09:26 PM |
|
|
So do any of these metal ones use the same holes as the carp rubber Iva ones ???
I think I am swaying and where is best place to buy from ???
Stainless steel ? Or are they plated ?
Thanks
|
|
|
ChrisLeary
|
| posted on 3/7/17 at 09:43 PM |
|
|
quote:
Originally posted by striker-4age
So do any of these metal ones use the same holes as the carp rubber Iva ones ???
I think I am swaying and where is best place to buy from ???
Stainless steel ? Or are they plated ?
Thanks
I've just ordered some from Protex, they'll be arriving tomorrow so I'll give you the low down. If you go onto their site they have
the diagram for each latch so you should be able to match one to the rubber IVA ones?
ATB,
Chris
Don't force it! Get a bigger hammer...
|
|
|
striker-4age
|
| posted on 3/7/17 at 10:06 PM |
|
|
Top man !!!! I also like the idea of the r clip
Thanks
|
|
|
striker-4age
|
| posted on 4/7/17 at 07:48 PM |
|
|
How do the latches seems m8 ?
|
|
|
ChrisLeary
|
| posted on 4/7/17 at 08:34 PM |
|
|
quote:
Originally posted by striker-4age
How do the latches seems m8 ?
Issues with delivery buddy, so should they turn up tomorrow, I'll let you know.
ATB,
Chris
Don't force it! Get a bigger hammer...
|
|
|
ChrisLeary
|
| posted on 5/7/17 at 09:31 PM |
|
|
So, the latches arrived today from Protex. They seem very good quality and well built. The locking mechanism via the pin seems to work, but time will
tell. Considering the price, I'm really happy with them.
ATB,
Chris
Don't force it! Get a bigger hammer...
|
|
|
striker-4age
|
| posted on 7/7/17 at 09:16 PM |
|
|
Do they fit in place of rubber Iva catches m8 ? Have u fitted them yet ???
Pics pics pics please
Thanks
|
|
|
bi22le
|
| posted on 30/12/18 at 10:40 PM |
|
|
Bump on this topic please.
I am currently fitting a new Bonnet. I have the rubber ones which have never caused me trouble but now I am refitting the catches the distance needs
to be spot on. Too loose and they in clip, to tight and they may not latch properly.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
