Pdlewis
|
| posted on 10/3/07 at 08:12 PM |
|
|
alternator tensioner
Hi,
I have just had to swop to an alloy RS style alternator bracket to prevent the alternator hitting the manifold. Now the tensioner bracket (flat alloy
bit with a long hole in it  for want of a better description) doesnt reach the alternator. is there a replacement part i can use or do i need to
fabricate something?
Cheers
Paul
|
|
|
|
|
DRC INDY 7
|
| posted on 10/3/07 at 08:27 PM |
|
|
You will need to make a longer one or if you can pull the alternator closer to the engine and use a small belt
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
|
auzziejim
|
| posted on 10/3/07 at 09:18 PM |
|
|
i made on from a couple of rod ends and some bits of threaded bar, a little over kill but looks the part
|
|
|
MkIndy7
|
| posted on 10/3/07 at 10:28 PM |
|
|
There is also a tapping behing the alternator that you can see on the block in that picture.
You can insert a bolt and a use a lock nut on to tension the alternator.
|
|
|
