archspeed
|
posted on 6/10/08 at 10:43 AM |
|
|
3 Inch Custom Exhaust Manufacturers - Notts / Derby Area
Hi,
Could anyone advise / recommend a place in the Nottinghamshire / Derbyshire area that could manufacture a custom exhaust?
Needs to be 3 inch!! Most places I've tried seem to only do 2.5 inch as a maximum.
Thanks in advance...
Kevin
[Edited on 6/10/08 by archspeed]
|
|
|
MikeR
|
posted on 6/10/08 at 10:47 AM |
|
|
Not quite in the area you specify but have you tried Custom Chrome in Nuneaton?
|
|
eznfrank
|
posted on 6/10/08 at 11:27 AM |
|
|
You could try Martin Keenan?
|
|
archspeed
|
posted on 6/10/08 at 11:43 AM |
|
|
Thanks for the suggestions,
I've not tried Custom Chrome - It is a bit far (I'm assuming I'll have to take the car to them to get it measured / built, ) but
having said that I'll keep them in mind just in case, so Thanks for the suggestion..
Martin Keenan?? That name rings a bell - Was he somthing to do with MK Sportcars?? A quick "google" tells me his place is MK Engineering
in Rotherham - So it will definatley be worth a shout!! Thanks for that.
Keep em coming - this website is great !!![](/images//smilies/smile.gif)
|
|
eznfrank
|
posted on 6/10/08 at 12:31 PM |
|
|
Yeah Martin used to own MK Sportscars before he sold it to his brothers (I think). His workshop is home based about 2-3 miles from MK's new
place. He's a decent chap who from my experience has reasonable charges and is very knowledgeable in what he does.
|
|
grazzledazzle
|
posted on 6/10/08 at 03:37 PM |
|
|
Tony Law in Leeds.
Second to non in my opinion.
|
|
archspeed
|
posted on 6/10/08 at 04:21 PM |
|
|
Tony Law does look good aswell!!
Wish I'd done this post last week, would have saved me no end of time !!
Thanks for the replies so far.....
Kevin
|
|
tcr
|
posted on 6/10/08 at 06:46 PM |
|
|
i had mine done by a guy in bilsthorpe notts link to my zorst
MK MIDI ZX10R
http://www.facebook.com/media/set/?set=a.4393256076054.2182513.1427988207&type=1&l=64c91c3c17
why isnt anything simple!!!
torquetune.co.uk
nrpexhausts.co.uk
|
|
NS Dev
|
posted on 8/10/08 at 04:37 PM |
|
|
quote: Originally posted by grazzledazzle
Tony Law in Leeds.
Second to non in my opinion.
Tony Law is in a league of his own, quality of work is excellent, most racers use his manifolds
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
Volvorsport
|
posted on 8/10/08 at 05:08 PM |
|
|
if your building a cosworth i assume you have a turbo ?
if so , its quite easy to build your own , i did mine .
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
archspeed
|
posted on 9/10/08 at 11:37 AM |
|
|
quote: Originally posted by Volvorsport
if your building a cosworth i assume you have a turbo ?
if so , its quite easy to build your own , i did mine .
Yes it is a turbo, I do have a mate who has all the kit for "TIG" welding ( i think its TIG anyway), so he could do it for me, but I
would still need to get my hands on all the "pre bent" pipes, and a nice 3 inch Silencer so he could weld them all up for me..
that gives me another problem, as looking around, there does seem to be places that do 3 inch "pre bent" pipes ( like Demon Tweeks) but
they only do standard 90 degree type bends, not the 7 degree bend that i will need on the straight piece that runs down the side of the car into the
silencer.. Add to that - I couldn't find a supplier that makes "off the shelf" 3 inch silencers...
hope that made sense..
|
|
NS Dev
|
posted on 9/10/08 at 12:25 PM |
|
|
Bends problem is easy, make em all from 90 deg bends, remember you don't have to use the whole bend!!!
Just a thin wedge from a 90 deg bend will get you a 7 deg one.
I thought Jetex made 3 inch silencers.
Failing that, milner offroad certainly sell the bits to make 3" silencers
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
NS Dev
|
posted on 9/10/08 at 12:26 PM |
|
|
PS for the bends, use stainless dairy piping and bends, they are dirt cheap, cheaper than demon tweeks mild steel bends by miles
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
archspeed
|
posted on 10/10/08 at 07:09 PM |
|
|
Thanks for all those who replied, its given me plenty to think about!
Kevin
|
|