Has anydody done ifso can you put some pictures up so i can have a look and help me decide if i like it before i do it thanks.

Mads, this has come up a few times on here. Seems the biggest problem is the tube running under the basis or hiding it away somewhere safe and not susceptible to heat. Have you had a search to look for results? Might give you what you're looking for.

Daniel Mason has just done this to his MNR. See what you think, his pics are in his archive

I still have the exhaust in this thread available if you are interested...


http://www.locostbuilders.co.uk/viewthread.php?tid=162811


let me know..

cheers Gavin

This is one I saw at the Donkevort factory

I will try and get some more pics of mine, 3" tube turns in behind the passenger seat then out the back, two very tight mandral bends, then goes between the lower bone and drive shaft (had the flatten a little here and add a kink) very close to the bush so giving minimal movement of these items then out the back.





Exhaust rear

Regards Mark

One of the best rear exit exhaust Ive seen is the zx10r one of bigrich,, I think there's a few more pictures in his archive.



[img]
Rescued attachment 2exhausts (Small).jpg [/img]

+1

quote:

---

Originally posted by PAUL FISHER
One of the best rear exit exhaust Ive seen is the zx10r one of bigrich,, I think there's a few more pictures in his archive.



[img]
Rescued attachment 2exhausts (Small).jpg [/img]

---

has any one got any pics of that..

His photo archive is here, there's not many other photo's of it, but if I recall, he ran it down the transmission tunnel.

http://www.locostbuilders.co.uk/photos.php?action=gal&user=bigrich&folder=worx%20%20build

[Edited on 19/05/04 by PAUL FISHER]