Putting together my NODIZ ignition system..
Bits arrived today 1pm - all up and running at 5pm

Removed distributor..
Cut up an old dizzy..
Nice platform for the coilpack :p

(Now fitted will post a pic tomoz)


[img][/img]

[Edited on 8/10/12 by johnemms]

Looks like a good place for it. Does it fit under the manifold ok
How much was the nodiz system it's something I looking at for my next upgrade

Hight Depends on your choice of donor distributor and coil pack..
This is quite high and just about fits..
Price for NODIZ is cheaper than Megajolt...
But check price with Matt
He has a rolling road available to tune it up when fitted

wish i' known about this system before i went with MJ.
I like MJ, but the nodiz system would have worked so much better with the vauxhall engine's internal trigger, rather than mounting one on the crank, and brackets etc. love the whole bluetooth thing too. and i'm currently getting a loom built including the MJ, so too late to change now. maybe later... looking forward to seeing how it all goes together

Well.. I read up on what I needed to do in advance..
Made bracket & fitted TPS - Saturday..
Made a home for the coilpack - Sunday..
Fitted trigger wheel/sensor/wiring - up & running - Monday

Today will wire in TPS and look at mapping...

The TPS is off a Rover scrap yard..
(The adapter is a 30amp brass conector drilled out and tapped 7/16UNF)

Oh yeah - the control box is the size of a packet of fags.. No EDIS needed either .. Simples :p


[img][/img]


[Edited on 9/10/12 by johnemms]

John,

Glad to see its all working well. I will have some new 'goodies' software wise for you in the next week or so

Matt

Cheers Matt ...
soooo simple to put together & only the size of a pack of ciggies!
Kicking out the external EDIS is a stroke of genius..
So tidy..

Ahh my rover TPS wires.. for reference..
Pin 1 Pink/Purple 5 V Supply from ECU
Pin 2 Green/Yellow Sensor position output
Pin 3 Pink/Black Ground
Swap pink wires over if TPS reading wrong way

[Edited on 9/10/12 by johnemms]

John,

I will add them to the manual.

Cheers,
Matt

Thats it for now .. all plumbed in..
Old dizzy & coil out .. big spark coil pack & tiny blutooth ignition in

[img][/img]

[img][/img]

John,

Really nice install...

Could you post the pics of the NODIZ unit fitted and crank wheel to our facebook page please?

http://www.facebook.com/pages/Nodiz-Pro-Ignition-Controller/402122336503751?fref=ts

Thanks

Posted a few pics of my quick installation on Facebook
Opened up spark plugs to 30 thou to take advantage of larger coil
Running good..
Looking forward to trying a few maps out..

So I here you have been out test driving?