I'm clearing the last few bits out of the garage. I haven't put it all together yet, but here's a general list of what's going:

- MT75 gearbox
- 2 @ 7.5" Sierra diffs (one open - the area around the seals is a little wet, one LSD in good condition, ratio for both is std Sierra - 3.68 sounds familiar, but I'd have to look up the codes again to be certain)
- a propshaft made from splicing a Sierra coupling onto a Ford Transit version with the sliding joint
- a dedion tube with fittings for a Satchell link (Mr. Satchell checked the geometry!) + drawings
- Sierra halfshafts and disc brake rear hubs, and 5 reasonable-ish wheels.

£50 for the LSD and you can have what want of the rest of it (what isn't taken goes to the tip as scrap metal).

I'm still digging out parts, but everything should be there somewhere.

Can't/won't post, it's all too big and awkward (much like myself!), and the postage would be cost more than the bits are worth.

If you want pictures or specs let me know.

U2U sent

U2U sent

diffs will be 3.64

While you're picking up LSD bits, probably a great opportunity to pick up your roll bar. CDS, Westfield fitment, weld it on, I do have the mounting plates (fresh, laser cut) if you want to bolt the hoop on. I've only removed this because I've gone for a cage.

http://img151.imageshack.us/img151/5508/baroffcar.jpg

Just off the A30, North Cornwall. Drop me line if you're interested., £70.

I've got a couple of people coming to have a look at the bits this weekend, and it's likely they will all go. I will re-post if anything is left over.

Thanks for the interest

Jolson,
Just did some repairs at Stithians school, small world