Can anyone provide a CAD drawing of a 36-1 trigger wheel that they could email me? PM me and I will supply email address.

I am using TurboCAD 2016 2D/3D, so must be compatible format.

Thanks in advance.

Chris

i've drawn a few in autocad before, but I wont be able to get them until the 4th...

they are pretty easy to draw, teeth just need to be the same width as the gaps and 4 to 5mm tall - draw all 36 then remove the 1 and your done

I can make cad gears like this in DXF format
I can export (using Freecad) to some other formats.

Dimensions will help


Gear

A dxf file is compatible so that woul be great. The disk needs to be 153.6 mm (approx. 6" in diameter and the centre hole will be 92 mm diameter.

I really appreciate this - thanks

I'll U2U/PM over my email address.

[Edited on 31/12/16 by carboy0]

By the way, for anyone interested, Canems EMS a letting excess stock trigger wheels go very cheaply compared to other obvious companies. From £12 plus VAT and postage.

No personal involvement here, but a mate of mine put me onto them.

http://canems.co.uk/category/trigger-wheels-c-3/un iversal-laser-cut-361-trigger-wheel-p-4.html

Many thanks rf900rush for sending a great CAD drawing.