Am i looking at unobtainum or worse obtainum with a huge price. Was up sorting the rones and have a knackered 90º Angle-Internal.....
Its rusted away so I was thinking of just buying a new one .....but dont want plastic.
short of that I was going to see if i can weld it and fabricate a part.....advice please
this is a double socket .....im needing a single socket
[Edited on 15-9-09 by mangogrooveworkshop]
Try Rainclear for new stuff, or architectural salvage yards for used.
Worst case Pat a friend of mine broke his FIRST piece of his cast guttering and replaced it with plastic and coated it in car underseal - the real
thick lumpy stuff and it looked just like cast iron from the ground!
His second but that some kits broke with a football he tacked back to gether with the welder and made a mould and then laid one up in fibreglass and
painted it to suit, cant tell the difference with ether to be honest.
The stuff Ive got seems to weld very nicely and I have some spare straights round the back of the shed......so guess whos fabbing up a 26 quid piece
of iron
let me know if it works!
Mine broke about 2 months ago and with it being a 3 floor building everyone that's come to have a look as declined on the basis they don't
have ladders tall enough 
Been round the usual suspects and found nothing. The cost from the online place is 26 plus a tenner for pat tax.
So we have some spare gutter so i will weld a new one. Welding cast iron is interesting as you have to limit the heat buildup to small runs.
will post pics later
quote:
Originally posted by 200mph
let me know if it works!
Mine broke about 2 months ago and with it being a 3 floor building everyone that's come to have a look as declined on the basis they don't have ladders tall enough
I know you said 'No Plastic' but this is some 'kind' of compromise 
The finish is rough, similar to cast iron, only you
can't see it that well in the photo.
Any good?