SeanStone
|
| posted on 8/10/12 at 08:06 AM |
|
|
MK4 Golf Subframe Captive Nut
When replacing the wishbones on my MK4 golf, the front most captive nut for the bolt that goes through the bush has come loose/un tacked
I've been advised that this will require a new subframe, however, is it possible to re-weld this on?
|
|
|
|
|
Peteff
|
| posted on 8/10/12 at 08:15 AM |
|
|
If you can get at it you should be able to weld it. You can make a plate with a nut welded to it and weld it in place if you can make a hole for it to
go in.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
