will121
|
| posted on 2/8/18 at 07:14 PM |
|
|
request for help with turning up a sleeve
can any one assist in turning me up a mild steel sleeve in exchange for beer tokens?
wants to be 100mm long with a 17mm hole through middle up to half way (50mm deep) and 15mm dia hole other end approximately 23-25mm outer diameter,
what ever is easier with stock.
can sketch if the attach doesn't make sense
thanks in advance
[img] [/img]
[Edited on 3/8/18 by will121]
|
|
|
|
|
PAULD
|
| posted on 3/8/18 at 01:45 PM |
|
|
Sleeve
|
|
|
PAULD
|
| posted on 3/8/18 at 01:46 PM |
|
|
Sleeve
I can do that for you but not for a week. Have you any tolerances on the bores?
|
|
|
will121
|
| posted on 4/8/18 at 11:51 AM |
|
|
quote:
Originally posted by PAULD
I can do that for you but not for a week. Have you any tolerances on the bores?
Thanks for the offer, managed to get it sorted now
|
|
|
