carlgeldard
|
| posted on 29/3/06 at 07:06 PM |
|
|
Wheel offset for the Sylva Phoenix
Does anbody know what the correct offset is for the Phoenix when using 6" x 14" alloy wheels. The tyre profile would be handy as well if
anybody knows.
Thanks Carl
|
|
|
|
|
jimgiblett
|
| posted on 29/3/06 at 07:45 PM |
|
|
Hi Carl,
Mine are 6x14 ET23 with 185/60/14s. Thats for an Stuart Taylor IRS version but I would guess the Live Axle version would be very similar.
Cheers
Jim
ps who did the Roll Cage. It looks excellent.
[Edited on 29/3/06 by jimgiblett]
|
|
|
Avoneer
|
| posted on 29/3/06 at 08:59 PM |
|
|
That cage is now a bloody hazard in Carls dark drive - right in the middle where you can't see it until you land inside it.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
carlgeldard
|
| posted on 30/3/06 at 09:51 AM |
|
|
Mines an IRS chassis and the roll bar is looking for a new home. If anybody wants it.
Carl
|
|
|
jimgiblett
|
| posted on 30/3/06 at 12:45 PM |
|
|
Yes I'm interested. U2U sent.
Cheers
Jim
[Edited on 30/3/06 by jimgiblett]
|
|
|
%20(WinCE).JPG)
