TimC
|
| posted on 26/3/08 at 09:49 AM |
|
|
Matching Black Satin Ceramic Exhaust Coating
Hi All
To cut a long story short:
I had my exhaust ceramc coated last year. To fit it, we (meaning Steve) found that it needed a flared 5" link pipe which Joe (Welderman) kindly
made. The issue is that the link pipe doesn't match the headers so needs to be coated in black. Camcoat who did the coating of the exhaust
want their miniumum order value of £30+P&P+VAT which seems excessive for 5" of pipe. Demon Thieves sell black satin ceramic coating at
£25+VAT so that isn't worthwhile either. It's purely costmetic, so I'd settle for any paint match that could cope with the heat.
Any ideas?
Finish is just a black satin:
.JPG)
TIA
|
|
|
|
|
Mr Whippy
|
| posted on 26/3/08 at 09:53 AM |
|
|
Halfords high temp paint works well but needs proper curing in an oven to really be resilient, a 5inch bit should be ideal.
[Edited on 26/3/08 by Mr Whippy]
Fame is when your old car is plastered all over the internet
|
|
|
Bluemoon
|
| posted on 26/3/08 at 09:54 AM |
|
|
I would guess that anything you choose is going to discolor differently than the ceramic coat.. Personally I would not be to worried about it, can of
VHT black paint would be my approach, you can always strip it off latter and get it ceramic coated if you didn't like it?
Dan
|
|
|
blakep82
|
| posted on 26/3/08 at 10:21 AM |
|
|
^ agree, nothing else will look the same, and i think you'll always notice it and it'll annoy you, so i'd say (now i'm not
really sure what this bit looks like) but make a feature of it, and make is a contrasting colour, the car looks black, so silver, or electric blue, or
red? just a splash of colour like...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
nige
|
| posted on 26/3/08 at 10:25 AM |
|
|
wilko .s
aerosol bbq black £4.99
cant remember make but its really good
when you start this journey
you think it will be done in " no " time but then " no " turns into a " bloody " long time
|
|
|
Paul TigerB6
|
| posted on 26/3/08 at 10:40 AM |
|
|
Fnd someone who is getting there own exhaust dont and ask them nicely to add it to their own order?? Cost you postage both ways plus a few quid for
the coating but will match
|
|
|
Krismc
|
| posted on 26/3/08 at 04:27 PM |
|
|
how much was the exhaust coating in the first place?? id be interested!!
[Edited on 26/3/08 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
TimC
|
| posted on 26/3/08 at 06:32 PM |
|
|
Lots - can't recall but in excess of £200.
|
|
|
