nilocp
|
| posted on 14/1/17 at 09:21 AM |
|
|
Nuts and Bolts - Imperial
I have reasonable quantities of UNF and UNC high tensile plated bolts in stock.
Off course these will not be the ones that you want, but you could give me a try! Some sizes there are loads, others not so many. Plain and nyloc nuts
as well.
I need thread, length and quantity please, and then I can give you a price.
Cash on collection is best, Paypal is an option.
Colin
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
SteveWallace
|
| posted on 14/1/17 at 09:55 AM |
|
|
I know that you would probably have mentioned it if you had them, but, on the off chance, do you also have any BSF bolts?
|
|
|
nilocp
|
| posted on 14/1/17 at 10:30 AM |
|
|
Steve, actually I do have a small quantity of BSF and BSW. But who uses any of those now??
Colin
|
|
|
fazerruss
|
| posted on 14/1/17 at 12:03 PM |
|
|
Do you have any 1/2 inch bsf by about 3 inch long?
"if assholes could fly this place would be an airport"
|
|
|
SteveWallace
|
| posted on 15/1/17 at 03:49 PM |
|
|
quote:
Originally posted by nilocp
Steve, actually I do have a small quantity of BSF and BSW. But who uses any of those now??
Colin
Hi Colin, I'm restoring an MG TC and to keep it as original as possible I need to use BSF. I have a fairly random selection of what I need to
replace those that were either missing or un-usable when I stripped the car, which was a bit of a barn find. I'll send you a U2U with a list.
|
|
|
Andybarbet
|
| posted on 15/1/17 at 05:12 PM |
|
|
I think I need 7/16" UNF bolts for my harness mounts. Do you have any & if so, what sort of lengths do you have ?
Unless anyone knows otherwise ? I'm not sure what grade I need though.
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
nilocp
|
| posted on 15/1/17 at 06:15 PM |
|
|
Yes they are 7/16unf. S or 8.8 grade is fine which is high tensile.
I will check sizes tomorrow
Colin
|
|
|
Andybarbet
|
| posted on 15/1/17 at 07:30 PM |
|
|
Thanks - Colin
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
nilocp
|
| posted on 16/1/17 at 01:30 PM |
|
|
Fazeruss I only have 2 off 1/2bsf X 4 bolts with a shoulder length of 3in.
Colin
|
|
|
nilocp
|
| posted on 16/1/17 at 01:32 PM |
|
|
Andy I have 1in 1 1/4, 1 1/2 but most have shoulders . Do you need a bolt (with a shoulder) or a screw?
Colin
|
|
|
nilocp
|
| posted on 16/1/17 at 02:31 PM |
|
|
Steve U2U sent, but cannot help I am afraid. Very difficult to find other than exact 1/4in increments, even for UNF and UNC now.
Colin
|
|
|
locost7-online.com
|
| posted on 16/1/17 at 06:50 PM |
|
|
Have you got one of these
5/16 unf SAE Grade 5. 1¾" long. ¾" unthreaded. thanks with nyloc
And a couple of 7/16 unf nylocs nuts
John
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
Andybarbet
|
| posted on 16/1/17 at 07:10 PM |
|
|
I need set screws & I reckon they need to be at least 2" +
I can measure my rollcage rail if you think you have any longer ones ? Thanks
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
nilocp
|
| posted on 16/1/17 at 07:21 PM |
|
|
Andy, ok yes there are longer but I will have to check if I have long sets.
Colin
|
|
|
mcramsay
|
| posted on 16/1/17 at 07:32 PM |
|
|
Just for interest, I work on a nuclear power station built in the 50's. All our fastenings are BSF or BSW. Our largest studs are 4" bsw
approx 12ft long! But we are probably one of the last few places that use whitworth bolts in the uk. If you think metric is hard to remember bolt
diameters and corresponding spanner size try remembering whitworth!
|
|
|
gremlin1234
|
| posted on 16/1/17 at 10:12 PM |
|
|
quote:
If you think metric is hard to remember bolt diameters and corresponding spanner size try remembering whitworth!
if I remember
correctly, they changed whitworth spanner sizes to save 'material' as they were machined from bar.
|
|
|
nilocp
|
| posted on 17/1/17 at 12:24 PM |
|
|
John yes I have the bolt and 7/16 nylocs, but I do have 7/16 metal locking nuts if you prefer.
Colin
|
|
|
nilocp
|
| posted on 17/1/17 at 12:29 PM |
|
|
Fazeruss can you make do with unf instead of bsf? Reason being they are high tensile, bsf isn't and I have a better choice in sizes. I have nuts
for both.
Colin
|
|
|
nilocp
|
| posted on 17/1/17 at 12:40 PM |
|
|
Andy longest 7/16 unf sets I have are 1 1/2in. Will that work for you?
Colin
|
|
|
Andybarbet
|
| posted on 17/1/17 at 01:14 PM |
|
|
Unfortunately not, I reckon my bushes on the rollbar are about 2" long & I think I need a bit longer on top of that.
Thanks for looking though :-)
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
nilocp
|
| posted on 22/1/17 at 12:56 PM |
|
|
locost7-online.com do you still want the bolt and nuts you asked about?
Colin
|
|
|
Dudefladge
|
| posted on 25/1/17 at 04:12 PM |
|
|
Hey Colin,
I sent you a U2U. Would you ship the fasteners to Germany?
Thanks.
Rob
Rob
Looking & Learning
|
|
|
nilocp
|
| posted on 25/1/17 at 04:18 PM |
|
|
Bolts
Yep will ship anywhere in the world
Colin
|
|
|
lmillin123
|
| posted on 25/1/17 at 06:24 PM |
|
|
Do you do 7/16 x5" long? Only need 4 with nuts and washers if poss.
|
|
|
nilocp
|
| posted on 26/1/17 at 11:19 AM |
|
|
7/16 X 5? Sorry no only 6in.
Colin
|
|
|
