MK chippy
|
posted on 4/7/09 at 07:09 PM |
|
|
Sierra diff flange thread size?
Hi guys i know this has been on here before but i can't find it. Just want to know the thread size on the bolts used to join the prop to the
diff?
Cheers
Dave
|
|
|
jacko
|
posted on 4/7/09 at 07:15 PM |
|
|
10mm fine thread 1mm i think
|
|
blakep82
|
posted on 4/7/09 at 07:19 PM |
|
|
quote: Originally posted by jacko
10mm fine thread 1mm i think
agree with that, and remember you should get grade 10 bolts, not 8.
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
ashg
|
posted on 4/7/09 at 10:17 PM |
|
|
dont forget to locktite them or you will be going down the motorway and the prop will work loose and come to eat your leg.
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
DanP
|
posted on 5/7/09 at 09:43 AM |
|
|
If you have any trouble getting hold of the right size then most ford dealers stock them pre-loctited for about 80p each.
Dan
|
|