Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Build a locost over the summer?
heinz1218

posted on 31/3/04 at 12:53 AM Reply With Quote
Build a locost over the summer?

My friend and I are graduating from high school and are wondering if it is at all feesible to build a locost over the summer (approximately 2.5 months, probably 50 hours or so a week ). We both will learn how to weld (we have friends who are very good and will teach us). We have decent knowledge of cars (my friend is taking a class, I have more basic an understanding but learn VERY quickly). What do you experienced builders out there think, can we do it? If it couldn't be completeted in 2.5 months, how far do you think we'd get?

Thanks, Andrew.

View User's Profile View All Posts By User U2U Member
Louis M

posted on 31/3/04 at 02:28 AM Reply With Quote
I think the ABSOLUTE MINIMUM would be for us to get a rolling chassis in the car by the end of the summer, that would be the absolute min.
View User's Profile View All Posts By User U2U Member
scutter

posted on 31/3/04 at 08:53 AM Reply With Quote
I would say that once your weldings up scratch a chassis shouldn't take more than a week two at most.

If you keep things standard and by the book then a summer shouldn't be to hard.

All the best Dan.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
locoboy

posted on 31/3/04 at 09:15 AM Reply With Quote
Check out gracelands website, that will show you how quickly a chassis can be built!





ATB
Locoboy

View User's Profile View All Posts By User U2U Member
James

posted on 31/3/04 at 09:49 AM Reply With Quote
Gotta agree with both Scutter and Col there- if you keep it standard you could do it with that much time.

On the other hand, if you bought a bare minimum kit (chassis, wishbones and bodywork) from either GTS or MK you could *definately* do it in that time.

Bear in mind you'll need a pile of cash saved as you'll need to buy so much stuff in such a short time. You're looking at approx' £4k IMHO. Yes, others have done it for half that but you guys won't have time to be shopping around for stuff.

You need to make a lot of plans in advance- makes the build a lot quicker!

HTH,

James

View User's Profile View All Posts By User U2U Member
chrisg

posted on 31/3/04 at 05:11 PM Reply With Quote
Rob Lane built a book Locost in three months - check oput his website, do a search on here 'cos I'm busy!!

Cheers

Chris





Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!

View User's Profile E-Mail User View All Posts By User U2U Member
mranlet

posted on 31/3/04 at 05:35 PM Reply With Quote
Assembly is easy - it takes hot rod shops only about a day or two to put everything together and have it running.

The time consumers are getting the right parts and making them fit and work right.

You can spend several weeks on just suspension and geometry if something isn't right.

My suggestion would be to read, read, read and do searches on the forum for discrepencies within the book (members not matching up, parts not fitting well, etc)

Good luck!

-MR

View User's Profile Visit User's Homepage View All Posts By User U2U Member
JoelP

posted on 31/3/04 at 07:15 PM Reply With Quote
yeah, its practice that counts. My first wishbones took ages and were crap, i re-did them today in about 3 hours from scratch, and they look loads better...






View User's Profile View All Posts By User U2U Member
Louis M

posted on 6/4/04 at 04:44 PM Reply With Quote
why would going not exactly from the book delay it? it shouldn't be that much different w/ a new tranny/engine except original chassis size which you can use the mcsorley plans
View User's Profile View All Posts By User U2U Member
Mark Allanson

posted on 6/4/04 at 05:31 PM Reply With Quote
If you vary from the established, tried and tested designs, you start to design bits yourself, this is where the extra time comes in, and looking for a part which suits your needs, like a master cylinder of the correct bore, or an axleor rack of the correct width to suit you new design





If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation

View User's Profile Visit User's Homepage View All Posts By User U2U Member
JoelP

posted on 6/4/04 at 06:19 PM Reply With Quote
and then fixing stuff when it goes wrong. Ask any signifcant deviant, they will probably say it takes exponentially more time.






View User's Profile View All Posts By User U2U Member
James

posted on 6/4/04 at 10:45 PM Reply With Quote
I'm a deviant! ;)

I've deviated loads from the book (arsed around with chassis dims, IRS, Pinto, mounted engine further back etc. etc.) all takes ages.
You can get away with deviation more if you plan more. I'll give you an example of a f'ck up that cost me loads of time:
Moved engine much further back than book. Before fitting it though, I'd made and mounted my top mount pedals, master cylinder mounts, and finished the brake lines. Thought it was coming on well.

Then fit the engine- oh look, susprise surprise the bloody exhaust route won't fit anywhere other than straight out the side and that means it goes through the master cylinder.

End result: new bottom mount brake pedal needed, new master cylinder mounts, new bias valve mounts, and remake of the brake lines. Complete cockup caused by lack of planning/design!

Oh well, the brake lines will look better 2nd time around!

Obviously my example shows that if you planned it properly then you could deviate but can you garantee you'll not forget anything??? A couple of days head scratching and re-making could screw your whole schedule!


HTH,

James

P.S. I sound like a boring old fart- don't get me wrong, for me the way things are done differently is now the most interesting thing about this hobby. But when time is such a crucial factor to you then just get a car built and worry about modding it later!

View User's Profile View All Posts By User U2U Member
Louis M

posted on 7/4/04 at 12:55 AM Reply With Quote
I totally agree w/ the modding part... I just want a good base for modding later
View User's Profile View All Posts By User U2U Member
Humanoid

posted on 22/5/04 at 11:55 PM Reply With Quote
I think the hardest thing is the dicipline, but as you graduate you'll have a lot of time to work, I'll work hard with my car during summer vacation too. But my goal is to have it ready until I graduate, next year good luck!

Regards
henrik - Sweden

View User's Profile E-Mail User View All Posts By User U2U Member
Alan B

posted on 23/5/04 at 01:46 AM Reply With Quote
quote:
Originally posted by James I'm a deviant!



Deviant my ass...

I'm a deviant, ask Fozzie...

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
mangogrooveworkshop

posted on 23/5/04 at 05:57 PM Reply With Quote
The scotlad did his on his patio in the middle of a scottish winter.......Hardcore.... and a nice car too...........fast






View User's Profile View All Posts By User U2U Member
Graceland

posted on 4/6/04 at 10:36 AM Reply With Quote
took me less than a month to have a rolling chassis with a running engine.

http://www.paulsimon8.freeserve.co.uk

had to give up and sell up as a severe chance in circumstances and housing arrangements (parents were going for divorce and i needed somewhere to live kinda thing) dictated the sale of my locost - slightly gutted to say the least






View User's Profile E-Mail User View All Posts By User U2U Member
James

posted on 4/6/04 at 12:04 PM Reply With Quote
Bloody hell... he's back!

Good to see you Paul, though sorry to hear about your parents etc.

Presumably you can start the Locost again though- you'll do it quicker and better this time around too!

Atb,

James

View User's Profile View All Posts By User U2U Member
splitrivet

posted on 4/6/04 at 12:31 PM Reply With Quote
I think you could do it with the right kit (chopsaw etc).
The main thing I think is to plan it and stick to your plan which Ive never done, just made it up as I went along same as James then had to remake things when they didnt fit.
The one thing I would do would be to buy the wishbones and brackets etc, these have caused me more grief than anything else.
One of the main reasons you'd suceed I think is if there is 2 of you, how many times have you been out in the garage on your build for 3 hours or so and basically done bugger all, which I dont think would happen with 2 people there plus it would be more fun.
Cheers,
Bob





I used to be a Werewolf but I'm alright nowwoooooooooooooo

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Graceland

posted on 4/6/04 at 05:29 PM Reply With Quote
Hiya James and others

yep, i'm back, with added bukakki. lol. - thats the reason i dissapeared for ages tho, still tho, life goes on, new job aswell so no more buses, thankfully, trains now tho - more cash, better careeer prospects and better job, sorted

and i'll hopefully get another build going yep, this time i can learn from the lil mistakes i made before






View User's Profile E-Mail User View All Posts By User U2U Member
James

posted on 4/6/04 at 05:34 PM Reply With Quote
quote:
Originally posted by Graceland
new job aswell so no more buses, thankfully, trains now tho -


Shame really- AFAIK they don't have those sexy LED lights on trains!

Isn't it a bit manky working on trains? From the little white/brown mounds I've seen spread along the track around here I wouldn't really fancy going near the underside of a train!

James

View User's Profile View All Posts By User U2U Member
Graceland

posted on 4/6/04 at 11:16 PM Reply With Quote
lol, aint gonna be working on them james - conducting then progression onto driving - the drivers are on 34k a year basic






View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.