locost7-online.com
|
posted on 21/2/16 at 06:12 PM |
|
|
Fireblade fuel pump mounting
I'm just working out where to install everything for the bike engine, where is the best place on a tiger Avon to put the fuel pump? Pics would
help, I'm sure I read it should be near the tank to work correctly
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
laptoprob
|
posted on 21/2/16 at 10:34 PM |
|
|
I don't think ive ever seen a fuel pump in a kit car other than in the boot.
Reason being is that it would cavitate if it wasn't close to the tank and end up starving the engine of fuel.
http://www.youtube.com/watch?v=ajlF4nWJtGA
|
|
BenB
|
posted on 21/2/16 at 10:44 PM |
|
|
On my carbs St1100 it's engine bay. Works fine.
|
|
laptoprob
|
posted on 21/2/16 at 10:54 PM |
|
|
Sorry should have said it will probably be 'ok' on carbs as flow and pressure is much less.
Nonetheless it would be better near the tank to be fair.
http://www.youtube.com/watch?v=ajlF4nWJtGA
|
|
40inches
|
posted on 22/2/16 at 08:45 AM |
|
|
Put mine low, beside tank.
![](/galpreviews/DSCI0601 [800x600].jpg) ![Fuel pump mounting](/gallery/DSCI0601 [800x600].jpg) Fuel pump mounting
|
|
adithorp
|
posted on 22/2/16 at 01:45 PM |
|
|
For a low pressure pump (carbs) it doesn't really mattermuch and both are common.
For a high pressure pump for injection is much better pushing fuel with a gtavity feed in so best mounted low at the back. Mounted above the tank or
sucking a long way and you'll get cavitation resuting in both bubbles in the fuel and the pump wearing prematurely
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|