locost7-online.com
|
posted on 25/3/16 at 07:46 PM |
|
|
Clip spacing on copper fuel pipe
I can't find the spec for spacing between p clips for iva does anyone know? I've been flicking through the manual but couldn't find
it
Cheers
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
designer
|
posted on 25/3/16 at 08:51 PM |
|
|
Don't think there is a 'spec', but I always do looms, brake pipes and fuel pipes at 250mm cntres.
|
|
adithorp
|
posted on 25/3/16 at 09:10 PM |
|
|
There's only a max' spacing in the IVA manual for wiring looms of 300mm. Most people then apply the same to brake and fuel pipes (think
manual just says "secure" for them). 250mm will be fine, though try to have a clip next to any tight bend; If they were 125mm either side
of a bend, it could flex about and I think I remember someone failing for that.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
big-vee-twin
|
posted on 25/3/16 at 09:10 PM |
|
|
The only thing they look for is that the pipes do not rubon the chassis but 250-300mm is good.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|