tomduffield13
|
| posted on 23/7/18 at 08:40 PM |
|
|
Garage Clear Out
With an extension in the near future, I've been instructed to have a clear out, apparently we need the space!
All located in Sutton Coldfield, West Mids - will post for cost. If needed, I frequent Lincoln, Coventry, Stoke, Derby and Birmingham.
I've posted the price i'd be comfortable with, but all offers are welcome and be considered!
Here we go:
1. Acewell 7652 Digidash - Used, but good condition - £100
 
Digidash
2. Alloy Header Tank - £20
 
Header1
3. RamAir Trumpet Socks - £20
 
Socks
4. Rad with Fan - £30
 
Rd2
5. Speedo and Rev Counter - SOLD
 
DIals
6. DanST Duratec Manifold, Heavy Duty Gasket, CBR ITBs with injectors (recently balanced), Trumpets and Pipercross Filter - Cost in excess of £500 -
£250
 
Inlet
 
ITBsTJD2
7. Doors - £50
 
Doors
8. Alloy Header Tank - £20
 
Header2
9. MS1 - SOLD
 
MS1
10. MS Simulator - £50
 
MSCont
11. 12v Clock - £5
 
Clock
12. VDO Temp - £10
 
Temp
13. VDO Fuel - £10
 
Fuel
14. Pipercross Filter - £10
 
Pipercross
15. Pinto Clutch - SOLD
 
PLate
16. 220m Clutch - £20
 
PLate2
17. Alloy Rad - £40
 
Radiator
[Edited on 24/7/18 by tomduffield13]
[Edited on 24/7/18 by tomduffield13]
[Edited on 25/7/18 by tomduffield13]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
ttalps2000
|
| posted on 23/7/18 at 09:14 PM |
|
|
U2U sent re MS1
|
|
|
Norfolkluegojnr
|
| posted on 24/7/18 at 07:36 AM |
|
|
Is the speedo mechanical or electric?
What is the diameter? 
|
|
|
tomduffield13
|
| posted on 24/7/18 at 08:01 AM |
|
|
quote:
Originally posted by Norfolkluegojnr
Is the speedo mechanical or electric?
What is the diameter?
Mechanical, I’ll measure tonight for you.... from memory it can’t be far off 100mm
|
|
|
Norfolkluegojnr
|
| posted on 24/7/18 at 09:07 AM |
|
|
Thanks let me know, could be just what i'm after - mine current reads sod all!
|
|
|
tomduffield13
|
| posted on 24/7/18 at 04:35 PM |
|
|
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!
Near as makes no difference 100mm, 103mm to be exact!
|
|
|
Norfolkluegojnr
|
| posted on 24/7/18 at 08:02 PM |
|
|
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!
Near as makes no difference 100mm, 103mm to be exact!
bugger! the hole is 90mm, with no room to increase. Thanks anyway 
|
|
|
tomduffield13
|
| posted on 24/7/18 at 08:22 PM |
|
|
quote:
Originally posted by Norfolkluegojnr
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!
Near as makes no difference 100mm, 103mm to be exact!
bugger! the hole is 90mm, with no room to increase. Thanks anyway
Ahh, that's the front measurement, the insert is smaller so it sits on the dash.
Picture with tape measure: https://ibb.co/k8ZVuT
Tom
|
|
|
snapper
|
| posted on 25/7/18 at 06:44 AM |
|
|
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
tomduffield13
|
| posted on 25/7/18 at 07:02 AM |
|
|
quote:
Originally posted by snapper
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks
I’ve had a first interest on the TBs, so you’re pencilled in if they don’t want them snapper.
I’ll send you the details tonight when I’m home from work.
|
|
|
Norfolkluegojnr
|
| posted on 25/7/18 at 07:57 AM |
|
|
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!
Near as makes no difference 100mm, 103mm to be exact!
bugger! the hole is 90mm, with no room to increase. Thanks anyway
Ahh, that's the front measurement, the insert is smaller so it sits on the dash.
Picture with tape measure: https://ibb.co/k8ZVuT
Tom
great thanks. I've replied to your U2U
|
|
|
motojohn
|
| posted on 25/7/18 at 01:39 PM |
|
|
Can i have the alloy rad #17 and the alloy header tank #8 please
|
|
|
tomduffield13
|
| posted on 25/7/18 at 02:13 PM |
|
|
quote:
Originally posted by motojohn
Can i have the alloy rad #17 and the alloy header tank #8 please
Yes, u2u your address and I’ll get postage costs from the post room at work today.
|
|
|
snapper
|
| posted on 25/7/18 at 06:29 PM |
|
|
quote:
Originally posted by tomduffield13
quote:
Originally posted by snapper
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks
I’ve had a first interest on the TBs, so you’re pencilled in if they don’t want them snapper.
I’ll send you the details tonight when I’m home from work.
Thanks, waiting with fingers crossed
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
tomduffield13
|
| posted on 1/8/18 at 09:24 AM |
|
|
8 (Header), 10 (Stim) and 17 (Rad) also sold.
Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.
Anyone for anymore before I list on Ebay? (Offers invited!)
|
|
|
Angel Acevedo
|
| posted on 1/8/18 at 09:54 PM |
|
|
quote:
Originally posted by tomduffield13
8 (Header), 10 (Stim) and 17 (Rad) also sold.
Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.
Anyone for anymore before I list on Ebay? (Offers invited!)
Long shot...
How much for alloy tank # 2 shipped to sunny México, Post Code 24120?
Thanks.
AA
Beware of what you wish.. for it may come true....
|
|
|
tomduffield13
|
| posted on 2/8/18 at 10:50 AM |
|
|
Thanks for your enquiry!
£21.10 through royal mail international, 5-7 days - so £41 all together.
Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay...
has anyone got experience of this, where you ship it domestically and they forward on?
[Edited on 2/8/18 by tomduffield13]
|
|
|
ReMan
|
| posted on 3/8/18 at 09:33 AM |
|
|
u2u re Acewell
www.plusnine.co.uk
|
|
|
tomduffield13
|
| posted on 3/8/18 at 02:39 PM |
|
|
Update:
1. Acewell 7652 Digidash - Used, but good condition - SOLD
2. Alloy Header Tank - £20
3. RamAir Trumpet Socks - £20
4. Rad with Fan - £30
5. Speedo and Rev Counter - SOLD
6. DanST Duratec Manifold, Gasket, CBR ITBs with injectors, Trumpets and Pipercross Filter - SOLD
7. Doors - £50
8. Alloy Header Tank - SOLD
9. MS1 - SOLD
10. MS Simulator - SOLD
11. 12v Clock - £5
12. VDO Temp - £10
13. VDO Fuel - £10
14. Pipercross Filter - £10
15. Pinto Clutch - SOLD
16. 220m Clutch - £20
17. Alloy Rad - SOLD
Open to the cheekiest of offers, ask away.
|
|
|
Angel Acevedo
|
| posted on 3/8/18 at 02:41 PM |
|
|
quote:
Originally posted by tomduffield13
Thanks for your enquiry!
£21.10 through royal mail international, 5-7 days - so £41 all together.
Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay...
has anyone got experience of this, where you ship it domestically and they forward on?
[Edited on 2/8/18 by tomduffield13]
Thanks,
I think I´ll pass...
Free Bump...
Beware of what you wish.. for it may come true....
|
|
|
