pjavon
|
| posted on 2/3/08 at 12:19 PM |
|
|
Wheel PCD
Can anyone help me, is the pcd on a peugeot the same as ford i.e. 108
Thanks Paul
Always keep a big hammer and a condom in your toolbox, if you can't fix it with the hammer
|
|
|
|
|
Paul TigerB6
|
| posted on 2/3/08 at 12:23 PM |
|
|
yes
http://www.carlsalter.com/wheel_fitments.html
|
|
|
pjavon
|
| posted on 2/3/08 at 01:28 PM |
|
|
Thanks, i'll go and buy my new wheels now
Paul
Always keep a big hammer and a condom in your toolbox, if you can't fix it with the hammer
|
|
|
zilspeed
|
| posted on 2/3/08 at 03:28 PM |
|
|
Remember that the nuts can be different.
Peugeots as standard have a curved seat and Ford have a tapered seat, so double check yer nuts before use !!
In other words, make sure that the nuts and the wheels match.
|
|
|
mcerd1
|
| posted on 2/3/08 at 03:52 PM |
|
|
also
the pugs use a slightly bigger centre bore (couple of mm's)
if they are after market wheels with the plastic rings in the centre - you should be able to get a ford sized set to replace them (63.4mm)
|
|
|
