I'm not sure if they are still doing them, but it might be worth a google search.
Hi
Does anyone know of a kit-car specific endurance racing formula? I used to endurance-race carts and would like to potentially compete again in
endurance - it's a very different approach to sprinting, hill-climbing, etc?
I wonder what's involved in setting one up if it's not been done before? I assume it's a full-time job and would require the governance
of someone like BARC.
Any ideas?
The 750mc does a 6 hour team endurance. Open to all 750mc formulas though.
I don't know if there is, but there should be.
^^^^^^ yep! definitely should be.
Definitely should be - i would hope it was quite open to allow individual flair and creativity to come to the fore; even to the point of letting
engines be free - those with monster screamers would be forever refuelling, balancing it against the more conservative tune. Maybe classes could be
grouped on power-to-weight, so the more conservative budget can still be competitive?
Any other ideas?
The Northern Sports and Saloons series has a reasonably open set of regs which could be easily adopted and amended.
Power to weight is a good way of defining classes, but in practice would it potentially add expense and complication to scrutineering in proving the
power outputs?
I'd go with a split of BEC/CEC's and then again for front and rear engines.
I wonder if it's the kind of thing one could take to them and ask if they could organise something?
One way would be to have a set of rollers on site, and quickly do an independent power-run as part of scrutineering? could be a bit of a hassle, but
may be workable?
or we could all be chaps, and present our power curves to scruitineering?
otherwise, bec, cec, front and read is a nice simple way of doing it
Power to weight ratio classes is used in the BMW and MR2 challenges IIRC. Think they do it at the beginning of every season and then tag each car to
make sure it has not had work don on it i.e. head off, sump off, ECU map produced/stored etc.
[Edited on 6/6/14 by Ugg10]
The Guild of Motor Endurance used to run 6 hour endurance events a few years ago - I did one of them and it was brilliant. Strictly speaking
(presumably for insurance reasons) it was NOT a race, but was a "timed regularity event". Could have fooled me
I'm not sure if they are still doing them, but it might be worth a google search.
Hi ugg10 - interesting about sealing the engines though - bearing mind we're a bunch of inveterate tinkerers I wonder how practical that is.
Saying that, if it's a one or two-off event per year, we could probably go for a set of rollers on site.
cheers
M
I reckon something could be put together in conjunction with one of the more local clubs - Darlington motor club or just approaching the owners of
Blyton Park maybe. Essentially it could be done as little more than a track day with a few more rules thrown over the top to get it off the ground
and keep organisation down.
Depending on the level of the event, you could just say that people have to put themselves into a class of their own deciding in terms of power to
weight and be forever labelled a cheat if they lie.
quote:
Originally posted by StevieB
Depending on the level of the event, you could just say that people have to put themselves into a class of their own deciding in terms of power to weight and be forever labelled a cheat if they lie.
'A chaps word is his honour'??!??
You lads haven't been involved in much racing have you 
quote:
Originally posted by D Beddows
'A chaps word is his honour'??!??
You lads haven't been involved in much racing have you
.