Brake flexy pair. Orig supplied by russbost, end to end length of 19", m10 x 1.0 bulkhead fitting to M10 x 1.0 swivel fitting. New only used in mock up (have had fluid in them) no half nuts for bulk head end supplied. £15 posted.
Free wishbones, these were the original prototype ones for the GKD legend and they have mounts for ARB droplinks, they have rubber bushes fitted, they are pretty rough bit rusty and powder coating flaking. To be honest these were going to the skip but if they of any use to anyone for mockup or anything then cover the postage of £10 and they are yours.
Used 8" springs, 180lb, 2.25 in diameter, red, couple of bits of paint chipped here and there, unknown manufacturer. £20 posted
R1 mirrors (not genuine Yam), used for 1 run out, they may look back to front as I had the mounts apart and only slaved together for a pic. £20 posted
Sierra column, as pictured, no steering lock or ign barrel has been cut off (not by me) £cover the p and p and its yours as its no use to me
Description
Pipercross filter, filter is shagged as its dried out, has a back plate i beleive for a carbed R1 (never tried so i cant absolutely confirm this. £offers (or is it only fit for the skip?)
Evolution fury 3 210mm chop saw, used and will probably need a new blade £25 posted
Trailer wheel clamp
Will fit up to 12" trailer wheels comes with 1 key (still hunting for the second) £20 posted
Charge spoon bike saddle (white) , brand new never fitted, £15 posted, same as this:
http://www.wiggle.co.uk/charge-spoon-saddle-with-cromo-rails/
[Edited on 17/7/13 by sdh2903]
