Fury Standard Body problem
tims31 - 13/3/14 at 02:35 PM
Well I have finally reached a point where I thought I could order the bodywork for my Fury kit so I could collect in a couple of months...Standard
Fury body with doors and the Le Mans bonnet.
Having spoken to Steve Hughes at Fury Sportscars he now tells me that the original mould he used has been damaged by his supplier too badly to be
used. If I want the standard body I will have to wait for him to make a new mould and buck which he won’t get done until, at the earliest the end of
the summer
This is going to put my build back by quite a bit now if I have to wait for this. I was hoping to sort the dash area out for the electrics etc but not
quite sure where I can fit it all. If anyone has some images of their electrics fitted around the passenger dashboard area (relays etc) could you send
them on to me. U2U for email address.
Also posted this as a bit of a warning to anyone else that wanted the standard body tub for their Fury, the Spider body is still available apparently.
carpmart - 13/3/14 at 11:17 PM
I think its good news as your forced in a certain direction now. I much prefer the spyder body, particularly with the correct offset wheels, it
really looks great. Also its lighter as no doors and associated hardware. That with a leMans bonnet is the best combo IMHO.
sjmatthews - 14/3/14 at 07:13 AM
quote:
Originally posted by carpmart
I think its good news as your forced in a certain direction now. I much prefer the spyder body, particularly with the correct offset wheels, it
really looks great. Also its lighter as no doors and associated hardware. That with a leMans bonnet is the best combo IMHO.
Agreed 
tims31 - 14/3/14 at 07:22 AM
Yes I like the Spyder body but I really want the doors as I want to try and get it weather proofed so I can use it as much as possible.
He does do the Spyder body without doors now but again that would be a nightmare to get in and out of with a roof on top.
sjmatthews, almost the same colour I am looking at for mine.
If you don't mind, could you U2U me the price you paid for your body kit? The prices Steve sent me through yesterday seemed excessive comapred to
when I priced the body kit up two years ago.
scudderfish - 14/3/14 at 08:50 AM
I've got doors and they are a waste of time, I never use them as intended. If you had a fixed roof I think it'd still be extremely hard to
get in or out. The entry hole is much smaller than an Elise and that was ungraceful at best.
Regards,
Dave
sebastiaan - 14/3/14 at 08:57 AM
look here, near the bottom for a possible solution...
NTDWM
http://www.kitcarcollection.com/occasionkits.php
McLannahan - 14/3/14 at 09:31 AM
Ahh...A Fury appreciation page! 
Well it'd be rude not to include my old car (now in Germany?)
jeffw - 14/3/14 at 09:38 AM
Not sure you have quite got the Kitcar bug....what is these 'doors' you speak of? Waterproofing a kitcar ....hahahahahhahahah
adithorp - 14/3/14 at 10:24 AM
Think my mate mine got the last body from the mould... so blame him.
You can do weather gear with the full screen spyder body. A few of us have half hoods. It's not weatherproof but does keep out 90%+ of the wet
and surprisingly cozy (even in snow, though a drift forms on the passenger side tonneau). You do have to be a bit flexible to slide in/out but
it's not hard. I'll post some pictures later.
peter030371 - 14/3/14 at 12:20 PM
quote:
Originally posted by jeffw
Not sure you have quite got the Kitcar bug....what is these 'doors' you speak of? Waterproofing a kitcar ....hahahahahhahahah
Isn't waterproofing when you park it in the garage at home and let the water drain out the holes in the floorpan
pjay - 14/3/14 at 12:55 PM
quote:
Originally posted by adithorp
Think my mate mine got the last body from the mould... so blame him.
As I understand it from Steve I got the second to last body which was the last one from a local fibreglass company - if anything I'm the one to
blame!
The last body was from the original fibreglass company who managed to squeeze one last one out but it took a lot of work because of the damage to the
mould.
Oh and the doors are a must for the wife to go anywhere in the car!
[Edited on 14/3/14 by pjay]
tims31 - 14/3/14 at 03:10 PM
quote:
Originally posted by pjay
quote:
Originally posted by adithorp
Think my mate mine got the last body from the mould... so blame him.
As I understand it from Steve I got the second to last body which was the last one from a local fibreglass company - if anything I'm the one to
blame!
The last body was from the original fibreglass company who managed to squeeze one last one out but it took a lot of work because of the damage to the
mould.
Oh and the doors are a must for the wife to go anywhere in the car!
[Edited on 14/3/14 by pjay]
Yep, thats a bit like my situation, if I wanted to get the car then she who must be obeyed needed to be able to get in it so the doors are a must,
also I actually like the look of the Fury with the doors.
I understand that it will never be truly waterproof but at least I can make a vain attempt. I want to do some fairly long runs in the car so if I can
at least attempt to put a roof on then that will all help.
pjay, if you don't mind me asking, what did Steve charge you for yours and when did you get it? (U2U me if you dont mind)
[Edited on 14/3/14 by tims31]
adithorp - 14/3/14 at 04:12 PM
To be fair to Steve the moulds were in poor condition when he took over and he's been getting them remade. As there are several bodies and bonnet
he's been working through them (I suspect) in order of demand and the standard/doored one is the last?
pjay - 14/3/14 at 09:12 PM
The trouble is that in the process he has also had to switch fibreglass suppliers as well.
adithorp - 14/3/14 at 10:08 PM
If the old one was the one in SW London area, they weren't good. Lots of none impregnated mat in mine when I broke it and I've seen the same
in some others pictures.
Hood pictures (of Jim Gibletts car 'cos I can't find any pictures of mine)....
[Edited on 14/3/14 by adithorp]
pjay - 15/3/14 at 09:18 AM
quote:
Originally posted by adithorp
If the old one was the one in SW London area, they weren't good. Lots of none impregnated mat in mine when I broke it and I've seen the same
in some others pictures.
Not sure which one but for the body I have Steve was happy with mat but colour match and finish in some areas was the problem - will need spraying but
this is okay based on the deal (and means I can go for the colour I'm after).
The half hood looks good.
