sirtommy
|
| posted on 7/6/11 at 08:52 PM |
|
|
Champion chassis failures
I have been looking at building the chassis to race and noticed a few mistakes that i could do with help clearing up. Firstly on page 52 there are
contradictions between the length dimensions 813+1456+76 does not equal 2334. Also tubes s and t appear to be wrong. Are there any amendments to the
book that i have failed to find. Could someone please help with plans ideally drawn on cad. So i can see where i'm going wrong.
|
|
|
|
|
jacko
|
| posted on 7/6/11 at 08:58 PM |
|
|
I believe there is some differences in the 2nd addition of the book
|
|
|
steve m
|
| posted on 7/6/11 at 09:15 PM |
|
|
Like every one in the book. is wrong, look at my car, a disaster !!
|
|
|
SeaBass
|
| posted on 7/6/11 at 09:31 PM |
|
|
McSorley Plans are what I built from - book chassis
http://www.sevenesque.com/plans/
No idea about racing requirements though.
|
|
|
iank
|
| posted on 7/6/11 at 09:33 PM |
|
|
Everything you need is here http://www.sevenesque.com/plans/
Corrected 2d CAD, Cutting list and an IGES 3d CAD model of the book car. Also bigger versions of the basic design.
ETA: Beaten on the draw again!
[Edited on 7/6/11 by iank]
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
big_wasa
|
| posted on 8/6/11 at 05:52 AM |
|
|
There are mor mistakes with the castor of the top wishbones aswell.
|
|
|
