lococost
|
| posted on 18/7/09 at 09:49 AM |
|
|
made a logo
As I wasn't entirely happy with the plastic logo supplied with the kit, I decided to design my own. Had it laser cut out of 2mm stainless and
polished it (although the mirror effect is nearly impossible to take picures of)
|
|
|
|
|
macspeedy
|
| posted on 18/7/09 at 09:52 AM |
|
|
please say you got more than one made..??
looks great by the way! 
|
|
|
Steve G
|
| posted on 18/7/09 at 09:56 AM |
|
|
Oooo shiny!! You could sell a dozen of those with ease!!! Verrry nice
|
|
|
Stuart_B
|
| posted on 18/7/09 at 10:06 AM |
|
|
very nice, i reckon that looks even beeter once it is out in the, i like the black, and stanless schem.
stuart
|
|
|
nitram38
|
| posted on 18/7/09 at 10:19 AM |
|
|
Nice job but post sva/iva I hope, otherwise it will fail on sharp radius etc.
|
|
|
Stott
|
| posted on 18/7/09 at 10:53 AM |
|
|
I thought if it protruded less than 5mm from the body surface it wasn't testable for radiusing?
I may be wrong, wouldn't be the first time
|
|
|
Kriss
|
| posted on 18/7/09 at 11:02 AM |
|
|
looks fab mate - well done
|
|
|
lococost
|
| posted on 18/7/09 at 11:51 AM |
|
|
Thanks for the kind remarks!
Obviously as any bling piece this is an after SVA mod.
I'd love to make some more, but shipping would be too expensive. I would be happy to supply the autocad drawing, laser cutting was only 10euro
a piece (that is about 1OŁ at your current Brown regime right?  ), so anyone interested could send them to their local laser cutter and make some
their selves.
[Edited on 18/7/09 by lococost]
|
|
|
.jpg)
