sg_frost
|
| posted on 30/5/05 at 05:17 PM |
|
|
ball joints for sierra hubs
What lower ball joints are people using with sierra hubs? or is nobody using them? Will the hub need machining, and if so, where can i have it done
close to N. Wales?
|
|
|
|
|
JoelP
|
| posted on 30/5/05 at 05:42 PM |
|
|
mk2 astra joints are apparently a direct fit, but most get them reamed and use cortina or maxi parts. However, there are a lot of different joints
that will fit - its just a matter of working out what! i had mine reamed at MK, near sheffield, but im sure most kit companies will do them.
Beware! Bourettes is binfectious.
|
|
|
tks
|
| posted on 30/5/05 at 08:15 PM |
|
|
yeah
or you buy a item on an special shop
alixter or something
that reamer (hand reamer) will do exactly the job for a maxi one..
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
Danozeman
|
| posted on 30/5/05 at 08:54 PM |
|
|
Most ppl use the maxi or cortina ones and get the hubs machined as said above. Ive gotta have a word with luego and take mine to get em done.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
AGK7
|
| posted on 10/6/05 at 01:00 AM |
|
|
Just wondering if someone could fill me in on what the Maxi ball joint is. We are familiar with the corti ones down here is Aus but i haven't
heard of the maxi ones.
Any clues on what car this is off, a google came up with an early Dodge??
Thanks in advance.
Andrew
Australia
|
|
|
Rorty
|
| posted on 10/6/05 at 03:49 AM |
|
|
agk, the Maxi was made by Austin in the UK and was a sort of shrunken Austin 1800 (virtually identical to the Leyland Tasman/Kimberly down here). The
Maxi wasn't imported into Oz.
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
