welderman
|
posted on 5/6/08 at 09:27 PM |
|
|
2003 R1 KPH TO MPH
As the title says, ive got a 2003 R1 engine with clocks, the clocks are in KPH and i would like to change to MPH, can this be done by just perssing
the buttons on the clocks?
Joe
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Jubal
|
posted on 5/6/08 at 09:38 PM |
|
|
Speedohealer will do it.
|
|
welderman
|
posted on 5/6/08 at 09:42 PM |
|
|
thought about that Derek, but will it get the KPH illumination off the digital dash?
Joe
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
Jubal
|
posted on 5/6/08 at 09:44 PM |
|
|
I get you now.
|
|
welderman
|
posted on 5/6/08 at 09:49 PM |
|
|
thats ok, bloody anoying though, wonder if a new set of clocks would do the trick
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
Jubal
|
posted on 5/6/08 at 09:51 PM |
|
|
Apparently, on some models you can press and hold the select button for a few secs to swap between mph and kph. Try it and see.
|
|
adithorp
|
posted on 5/6/08 at 09:54 PM |
|
|
I can't see anything in the service manual.
adrian
|
|
welderman
|
posted on 5/6/08 at 09:55 PM |
|
|
select button, ok will try it out tomorrow, Ta
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
Jubal
|
posted on 5/6/08 at 10:22 PM |
|
|
Actually, the service manual says this:
For the U.K. only: To switch the speedometer display between kilometers and miles, press the “SELECT” button and “RESET” button together for at least
two seconds.
|
|
welderman
|
posted on 6/6/08 at 07:39 AM |
|
|
tried the reset ans select, nothing, but i did however change when my shift light flashes, lol, now at 10.5k.
went into loads of other things but turned ign off got scared .
Is there a manual i can download from somewhere
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
jimgiblett
|
posted on 6/6/08 at 08:47 AM |
|
|
If the clocks are Euro spec (as opposed to UK spec) then the only way is to open the back up and solder across one of the joints on the PCB.
The problem is knowing which one. I bottled out and sent my clocks off to Scorpio electronics who relieved me of £60 for the pleasure. They also
reset my odometer to zero. They have done two sets of clocks and service is very quick (48hr turn round)
- Jim
|
|
welderman
|
posted on 6/6/08 at 08:56 AM |
|
|
do you have a contact number, my clocks have 0 miles though, engine is a spanker
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
adithorp
|
posted on 6/6/08 at 08:43 PM |
|
|
You can download the manual here
http://yzf-r1forum.net/
Don't try to print it without checking you've got lots of paper and ink though; It's BIG. Guess how I know!
adrian
|
|
welderman
|
posted on 6/6/08 at 09:39 PM |
|
|
Thanks Adrian, Derek sent me a link before, not printed anything off yet though.
Hope all my messing about has not upset anything.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
lococost
|
posted on 7/6/08 at 08:52 AM |
|
|
Just as a note: for SVA, your speedo needs to have an illuminated MPH sign, so putting a white decal over won't do. (it's something all
of us oversea BECers need to take into consideration).
|
|
welderman
|
posted on 7/6/08 at 07:34 PM |
|
|
, now im gutted
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
Jubal
|
posted on 8/6/08 at 08:20 AM |
|
|
quote: Originally posted by welderman
, now im gutted
I'll lend you my clocks for SVA. If I still have them in 2010
|
|
welderman
|
posted on 8/6/08 at 10:27 PM |
|
|
quote: Originally posted by Jubal
quote: Originally posted by welderman
, now im gutted
I'll lend you my clocks for SVA. If I still have them in 2010
I know ive only had it a few month, but i keep doing jobs for other people on the forum, lol.
Thanks for the offer though
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
jimgiblett
|
posted on 18/6/08 at 05:48 PM |
|
|
quote: Originally posted by welderman
do you have a contact number, my clocks have 0 miles though, engine is a spanker
Sorry didnt sub to the thread so didnt get back to you.
[/quoteLinky
I think Mark Tsang (the proprietor) tried to charge me more but I said that he charged me £60 last time (which he did when I built my old R1 Phoenix)
and he said fair enough.
Cheers
Jim
|
|
welderman
|
posted on 19/6/08 at 06:51 AM |
|
|
thanks for the linky Jim
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|